GSK 980TDi, Руководство пользователя

Страница: 37 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Chapter 1 Programming
21
Ⅰ
Programming
-9999.999 ~ 9999.999 (deg) 4.3
metric input (G21)
-9999.9999 ~ 9999.9999 (mm)
-9999.9999 ~ 9999.9999 (deg) 4.4
4.4
0.1 μ level
（
IS-C
）
inch input (G20)
-999.99999 ~ 999.99999 (inch)
-999.9999 ~ 999.9999 (deg)
3.5
3.4
Note : 5.3 in the above table means 5-bit integer and 3-bit decimal. And other data likes these.
1.6.4 Incremental System Data Range & Unit of Basic Axis
z Speed parameter
Linear axis speed parameter unit is determined by the machine type. i.e.: metric machine speed
unit: mm/min, inch machine is: 0.1inch/min.
Linear axis speed parameter range is determined by the machine type and incremental system
type.
Data parameter No. 027(cutting upper speed):
Machine type Incremental system Linear axis speed unit Parameter range Rotary axis speed unit
μ level
（
IS-B
）
10~ 15000
Metric machine
0.1 μ level
（
IS-C
）
mm/min
10~ 15000
μ level
（
IS-B
） 5~58000
Inch machine
0.1 μ level
（
IS-C
）
0.1inch/min
5~5800
deg/min
Rotary axis does not execute the metric/inch conversion, the rotary axis speed unit is deg/min;
the parameter range is the same that of metric machine.
The different incremental system switch may cause the set max. run speed in the data parameter
exceeding max. range permitted by the system, so, the operator should modify the speed parameter
to avoid the unexpected when the first power-on after switch.
z Incremental parameter
The unit and range of linear axis incremental parameter are determined by the machine type and
incremental system type as follows:
Machine type Incremental system Linear axis incremental unit Linear axis parameter range
μ level
（
IS-B
）
0.001mm
-99, 999.999~ 99,999.999
Metric machine
0.1 μ level
（
IS-C
）
0.0001 mm
-9, 999.9999~ 9,999.9999
μ level （ IS-B ）
0.0001inch
-9, 999.9999~ 9,999.9999
Inch machine
0.1 μ level
（
IS-C
）
0.00001 inch
-999.99999~ 999.99999
The rotary axis does not execute the metric/inch switch, the unit of rotary axis incremental
parameter is determined by the incremental system type. The range of rotary axis incremental
parameter is the same that of the metric machine.
Machine type Incremental system Rotary axis speed unit Rotary axis parameter range
μ level
（
IS-B
）
0.001°
0~ 99999.999
Metric, Inch
machine
0.1 μ level
（
IS-C
）
0.0001°
0~ 9999.9999