GSK 980TDi, Руководство пользователя

Страница: 339 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Chapter 11 Data Setting
323
Ⅱ
Operation
CHAPTER 11 DATA SETTING
11.1 Data Setting
Press and then to enter the CNC setting page which includes the switch setting,
level setting and parameter operation function as follows:
11.1.1 Switch Setting
When the cursor is in the switch set column, the system can set parameters, programs,
automatic sequence number ON/OFF state.
1) Switch explanation:
Parameter switch: parameters can be modified when the parameter switch is ON; they are
forbidden to alter when it is OFF.
Program switch: programs can be edited when the program switch is ON; they are forbidden to
edit when it is OFF.
Automatic block number: the block number is automatically generated when the automatic
sequence number switch is ON and a program is edited; when the switch is OFF, the
block number is input manually instead of being automatically generated.
2) Switch setting method:
a) Move the cursor to the setting item;
b) Directly press the , or soft button to open the switch, if it is ON, press
the corresponding , or soft button to close it; simultaneously, the cursor
will automatically move to the switch item;
Note: When the parameter switch is shifted from “OFF” to “ON”, an alarm will be issued by CNC system. The
alarm can be cancelled by pressing . If the PARM SWT is shifted again, no alarm is issued. For
security it should set the PARM SWT for “OFF” after the parameter alteration is finished.