GSK 980TDi, Руководство пользователя

Страница: 162 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
146
Ⅰ
Programming
Fig. 3-88
Fig. 3-89
The system can machine one thread with many tool infeed in G92, but cannot do continuous two
thread and end face thread. Definition of thread pitch in G92 is the same that of G32, and a pitch is
defined that it is a moving distance of long axis(X in radius) when the spindle rotates one rev.
Pitch of taper thread is defined that it is a moving distance of long axis(X in radius). When
absolute value of Z coordinate difference between B point and C point is more than that of X (in
radius), Z is long axis; and vice versa.
Cycle process: straight thread as Fig.3-88 and taper thread as Fig.3-89.
①
X traverses from starting point to cutting starting point;
②
Thread interpolates (linear interpolation) from the cutting starting point to cutting end point;
③ X retracts the tool at the cutting feedrate (opposite direction to the above-mentioned ① ), and
return to the position which X absolute coordinate and the starting point are the same;
④
Z rapidly traverses to return to the starting point and the cycle is completed.
Notes ：
1) Length of thread run-out is specified by № 019 when J, K are omitted;
2) Length of thread run-out is K in the long direction and is specified by № 019 when J is omitted ；
3) Length of thread run-out is J=K when K is omitted;