GSK 980TDi, Руководство пользователя

Страница: 558 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
542
IV Appendix
No. Content Remark
043 There is no Ns or Nf in G70~G73
044 Call subprograms in G70~G73
045 Ns does not command G00 or G01 in G70~G73
046 Initial blocks are employed with the forbidden G commands in G70~G73
047 Unusable G code is in the block specified by Q in G70,G71,G72,G73
050
G71~G72 command can't satisfy the condition of single increase or
decrease
051 Single infeed exceeds its allowed range in G71 or G72
052 Single tool retraction exceeds its allowed range in G71 or G72
053
The cycle starting point is in the closed area formed by the starting point and
end point of the finishing path in G71 or G72
054 Flute quantity is more than 10 in G71 or G72
055 X/ Z value is not specified in the first block or the movement is 0 in G71
056 X/ Z value is not specified in the first block or the movement is 0 in G72
057 Cycle times is less than 1 or more than 99999 in G73
060 Single tool retraction R(e) exceeds its allowed range in G74 or G75
061 The tool retraction is negative at the end of cutting in G74 or G75
0062 Z value is 0 or not input in G74
0063 Q is in default or out of range in G74
0064 X single cutting value(P) exceeds its allowed range in G74
0065 X value is 0 or not input in G75
0066 P is in default or out of range in G75
0067 Z single cutting value(Q) exceeds its allowed range in G75
0069
Starting point coordinates are abnormal when cycle ends and returns to
starting point
0070 The tool starts from the midway in taper screw thread cutting in G76/G78
0071 Min. cutting value exceeds its allowed range in G76 or G78
0072 Finishing allowance exceeds its allowed range in G76 or G78
0073 Tooth height is less than finishing allowance or 0 in G76 or G78
0074 Cycle times exceeds its allowed range in G76 or G78
0075 X/Z movement distance in G76 is zero
0076 There is no specified tooth height P in G76 or G78
0077 There is no the first cutting depth Q or Q is 0 or Q is not input in G76 or G78
0078 Tool nose angle is more than or equal to thread angle in G76 or G78
0079 Cutting value of G78 is out of range(0,1)
0080 Cutting mode of G78 is out of range(0,1,2,3)
0082
Have no the measured position arrival signal in parameter specifying area in
automatic tool offset(G36,G37)
0083
Specifying an invalid axis or a command is incremental in automatic tool
offset (G36,G37). Modify the program
0084
Have the measured position arrival signal in area set by the parameter in
automatic tool offset(G36,G37)
0085
The distance between the starting point and the target is less than the
setting (142,143) in automatic tool offset(G36,G37), have no set the rapid
motion area