GSK 980TDi, Руководство пользователя

Страница: 557 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Appendix VI Alarm List
541
IV Appendix
APPENDIX VI ALARM LIST
1.CNC alarm
No. Content Remark
000 Emergent stop alarm and ESP open circuit
001 Called programs do not exist or cannot be opened
003 Characters are less than 2 or more than 11 for one word
004 Address error (address is A~Z)
005 Illegal command value
006 Block numbers are negative or with decimals
007 Illegal G commands
008 Execute G96 when the spindle analog voltage control is invalid
009
Command movement distance when G commands in group 00 and 01 are
not input and there are invalid commands in group 01
010 There are the same addresses in one block
011 There are more than 40 words in one block
012
Command values exceed their valid range or command addresses which
cannot be omitted is omitted
013
Input S commands except for S00~S99 when the spindle analog voltage
control is invalid
014 G commands in group 00, 01 and 12 cannot be in the same one block
015
Execute M commands for spindle automatic gear shifting when the spindle
analog voltage control is invalid
016 Tool offset numbers exceed their valid range(0~32)
017 Tool number exceeds the range of No.084 parameter
018
The data specified by the interpolation command cannot form a correct
curve
019
The tool group number exceeds the range
（
1~32
）
in the tool life
management
020 Cannot execute T command in C tool nose radius compensation, cancel it
0021 G71~G78,G90,G92,G94 can only be used in G18 plane
0022 Forbid to use plane exchange code G17~G19 here
0023 The programming radius of G05 code is out of allowable range
024 There is no G11 or G13.1 in the program
025 There is no tool in the current tool group in the tool life management
026 The current tool group has not been defined in the tool life management
027 The tool quantity exceeds 8 in the current tool group in tool life management
028 The tool life management function is invalid and G10 L3 cannot be used
030
G17~G19 codes Cann't be executed in C tool compensation or cylindrical
interpolation
032 Absolute value of R is more than that of U/2 in G90, G92,G92.1
033 Absolute value of R is more than that of W in G94
040 There are more than 100 blocks in G70~G73
041 Ns and Nf are reversed each other in G70~G73
042 There is no Ns or Nf or they exceed their allowed range in G70~G73