GSK 980TDi, Руководство пользователя

Страница: 477 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Chapter 3 Parameters
461
Ⅲ
Connection
K 1 9 *** MACH HDFD *** *** *** *** ***
Bit6 1: The machine tool panel is the vertical one;
0: The machine tool panel is the horizontal one
Bit5 1: MPG interruption is enabled in operation;
0: MPG interruption is disabled in operation.
K 2 0 *** *** *** *** *** ***
DBMPG
1
DBMPG
0
Bit 1 Dual-MPG function selection bit 1: 10: It is enabled and only the MPG 1 on the panel button
is enabled, as well only the MPG 2 is enabled of the external MPG input.
Bit 0 Dual-MPG function selection bit 0: 00 Disabled 01: It is enabled and the MPG 1 fixes the X
axis, and the MPG2 fixes the Z axis, and the step-length can be selectecd;
3.1.3.2 DT Parameter
Address Meaning
DT000
Time for original gear disabling during spindle automatic
gear changing (ms)
DT001 Delay time after the changed spindle gear is in position (ms)
DT002 Detection time for low pressure alarm (ms)
DT004 Permit time for tool changing (ms)
DT005 M command execution time (ms)
DT006 S command execution time (ms)
DT007 Delay time for tool post from CW to CCW output (ms)
DT008 Tool post lock signal detection time (ms)
DT009 Tool post CCW rotation lock time (ms)
DT010 Spindle braking delay output time (ms)
DT011 Spindle braking output time (ms)
DT012 Spindle JOG time (ms)
DT013 Time for manual lubricating ON (0: time is not limited) (ms)
DT014 Chuck clamping command execution time (ms)
DT015 Chuck unclamping command execution time (ms)
DT016
Interval of automatic lubricating (ms) (can be modified
directly)
DT017
Time for automatic lubrication output (ms) (can be modified
directly)
DT018 Chuck pulse output width (ms) (can be modified directly)
DT020 Spindle clamping/unclamping time (ms)
DT021 Spindle stop, chuck enable delay time (ms)
DT023
Delay time before spindle motor torque decreases to 0 after
spindle starts clamping
DT024 Spindle CS shifting or positioning shifting allowable time (ms)