GSK 218M, Руководство по подключению и программированию PLC

Страница: 108 / 227

GSK218M CNC System Connection and PLC Manual
105
to 0 and reports that the completion signal has been received.
（ 7 ） When the strobe signal is 0, the FDURING signal is set to 0.
（
8
）
When the FDURING signal is 0, all code signals are set to 0 and all sequence
operations of miscellaneous function is completed.
（
9
）
CNC executes the next block when other instruction has been completed during the
same block.
1. When the tool function is executed, the programmed tool number is transmitted S
code, T code.
2. When the spindle speed function, tool function is executed, the code signal is
maintained until a new code for the corresponding function is specified.
Time sequence is as follows:
There is one miscellaneous function during a block.
Move instruction and the miscellaneous function during the same block. Execution of a
miscellaneous function without waiting for move instruction completion:
M00~M31
MF
PLC operation
FIN
DEN
M00~M31
MF
PLC operation
FIN
DEN
：
0
Move instruction