GSK 218M, Руководство по подключению и программированию PLC

Страница: 104 / 227

GSK218M CNC System Connection and PLC Manual
101
The servo error of the corresponding control axis is withduring the specified allowance.
These signals become “0” when:
The servo erro of the corresponding control axis exceeds the specified allowance.
Signal address
7.4 Error detect
General Generally, the CNC does not zero the feedrate at the interface of two block
during cutting feed.
If the error detect signal is used, it is possible to specify that a block not be started until the
acceleration/deceleration of the previous block has been completed.
Signal Error detect signal
SMZ <G009#2
>
[
Classfication
] Input signal
[
Function
] If the signal is set to 1, the control unit operates as follows:
At the interface of two blocks during cutting feed, the control unit waits until the
acceleration/deceleration of the first block has been completed. The setting of the
SMZ signal determines whether, at the interface of two cutting blocks, the control unit
waits until the acceleration/deceleration of the previous block has been completed.
Signal address
INP4 INP3 INP2 INP1
F018
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0
SMZ
F009
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0