GSK 218M, Руководство по подключению и программированию PLC

Страница: 186 / 227

GSK218M CNC System Connection and PLC Manual
183
State parameter No.011
0 1 1 ZNLK
ZNLK
=0 ： When the zero return is executed, the direction key is not locked by its self by
pressing it continuously.
=1
：
When the zero return is executed, the direction key is locked, and the zero
return runs to the zero to stop after the direction key is pressed one time. Upon
“RESET”, the zero return immediately stops during the zero return.
Data parameter No.099
0 9 9 ZRNFL
ZRNFL: low rate of X, Y, Z-axis reference point return(all axes).
Data parameters
No.100 ～ No.104
1 0 0
X-axis reference point return speed
1 0 1
Y-axis reference point return speed
1 0 2
Z-axis reference point return speed
1 0 3
4TH-axis reference point return speed
1 0 4
5TH-axis reference point return speed
Speed setting of all-axis reference point return
4.9 Input/output signal control of spindle CW/CCW
z Signals
M03 ： spindle CCW
M04
：
spindle CW
M05
：
spindle stop
ENB ： spindle enable
SAR
：
spindle speed arrival
ZSPD ： spindle zero speed check
Parameter diagnosis(machine side output state)
state
address
Y1.7 Y1.6
Pin XS40.13 XS40.25
Y1.6=spindle CCW signal output
；
Y1.7= spindle CW signal output.
state
address
Y2.5 Y2.0
Pin XS40.05 XS40.01
Y2.0=spindle enable
；
Y2.5=spindle zero speed clamp signal output
Parameter diagnosis(machine side input state)