GSK 218M, Руководство по подключению и программированию PLC

Страница: 133 / 227

GSK218M CNC System Connection and PLC Manual
130
When the required number parts are zero, this signal is not set.
The PRTSF signal is set to 0 when:
z Maching of the specified number of parts has not yet been
completed.
z
The system is reset.
General-purpose integrating counter start signal
TMRON <G009#0>
[
Classfication
] Input signal
[
Function
]
The CNC has a counter which is started by an input signal from the PMC.
Additionally, there are counters for counting the automatic operation time
and counting cutting time. The count for these counters can be displayed
on the screen. The count can be preset by the operator pressing MDI key.
[
Operation
]
When the signal is set to 1, the counter starts counting.
Signal address
12.5 Memory protection key
General
A key called the data protection key is used to prevent part programs, offset values,
parameters, and setting data from being registered, modified, or deleted erroneously.
Signal Memory protection signal
KEY1
～
KEY4<G005#0
～
#3>
[
Classfication
] Input signal
[
Function
]
Enables the changing of the memory contents from the MDI panel. Four
signals are provided. The operations that can be performed on the
contents of memory by each signal vary depending on the setting of
parameter
.
When KEY=0 KEY1: Enables the input of tool compensation values and the workpiece
zero point offset values, and workpiece coordinate systems shift
amount.
KEY2: Enables the input of setting data and macro variables and tool life
management data.
KEY3: Enables program loading and editing.
KEY4: Enables PMC data(counter data tables)
When KEY=1 KEY1: Enables program loading and editing, as well as the input of PMC
parameters.
KEY2 to KEY4: Not used.
PRTSF
F061
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0
TMRO
G009