GSK 218M, Руководство по подключению и программированию PLC

Страница: 192 / 227

GSK218M CNC System Connection and PLC Manual
189
=0: Manual rapid traverse during the period from power-on time to the completion of
the reference point return is disabled.
LRP
=1: The positioning(G00) interpolation is performed with the linear.
=0: The positioning(G00) interpolation is performed with the non-linear.
RFO
=1: The machine tool stops moving when the feedrate override is F0 during rapid
traverse.
=0: The machine tool does not stop moving when the feedrate override is F0 during
rapid traverse.
TDR
=1: The dry run is enabled during the tapping.
=0: The dry run is disabled during the tapping.
RDR
=1: The dry run is enabled.
=0: The dry run is disabled.
System parameter number
0 1 4 DLF HFC
DLF
=1: Reference point return is executed at manual rapid traverse rate after a reference
point is set.
=0: Reference point return is executed at rapid traverse rate after a reference point is
set.
0086 Dry run speed 0
Set range: 0
～ 9999.9999
0087 The cutting feedrate during Auto mode when
power-on. 0
Set range: 0
～
9999.9999
0088 X-axis rapid operation speed 5000
Set range: 0
～ 9999.9999
0089 Y-axis rapid operation speed 5000
Set range: 0
～
9999.9999
0090 Z-axis rapid operation speed 5000
Set range: 0
～
9999.9999