GSK 218M, Руководство по подключению и программированию PLC

Страница: 196 / 227

GSK218M CNC System Connection and PLC Manual
193
=0: The MPG halt relative position displaye is not changed.
0 2 9 MCM IWZ WZO MCV GOF WOF
WOF
=1: The tool offset value by MDI key input is disabled.
=0: The tool offset value by MDI key input is not disabled.
GOF
=1: The tool geometric offset value by MDI key input is disabled.
=0: The tool geometric offset value by MDI key input is not disabled.
MCV
=1: Macro variable setting by MDI input is disabled.
=0: Macro variable setting by MDI input is not disabled.
WZO
=1: Setting a workpiece zero point offset value by MDI key input is disabled.
=0: Setting a workpiece zero point offset value by MDI key input is not disabled.
IWZ
=1: Setting a workpiece zero point offset value by MDI key input during halt state is
disabled.
=0: Setting a workpiece zero point offset value by MDI key input during halt state is
not disabled.
MCM
=1: The setting of custom macros by MDI key operation is enabled only during the
MDImode.
=0: The setting of custom macros by MDI key operation is enabled regardless of the
mode.
System parameter number
0 2 8 MCL MER MEE MKP
MKP
=1: The written program is cleared when M02, M30 or is executed in MDI mode.
=0: The written program is not cleared when M02, M30 or is executed in MDI mode.
MEE
=1: The program is not edited during operation in MDI mode.
=0: The program can be edited during operation in MDI mode.
MER
=1: The program can be edited during operation execution in MDI mode.
=0: The executed program is not deleted when the last has been executed in MDI
mode.
MCL
=1: Upon the reset key, the written program is deleted during MDI mode.
=0: Upon the reset key, the written program is not deleted during MDI mode.
System parameter number
0 3 0 ABS MAB DPI
DPI
=1: The decimal point during programming is omitted: mm,sec.
=0: The decimal point during programming is omitted: mduring setting unit.