GSK 218M, Руководство по подключению и программированию PLC

Страница: 132 / 227

GSK218M CNC System Connection and PLC Manual
129
12 Display/Set
12.1 Clock Function
General
Time is displayed during the hour/nimute/secod format on set screen.
The custom macro system variable can be used to read the time.
Time reportation can be read and written.
12.2 Displaying operation history
General
This function displays a history of the key stroke and signal operations, performed
by the CNC operator, when a failure or CNC alarm occurs.
12.3 Help function
General
The help function displays on the screen detailed reportation about alarms issued
during the CNC and about CNC operations. The screen displays detailed
information about the alarms and how to recover from them. The detailed
information is displayed only for a limited number of P/S alarms. These alarms are
often misunderstood and are rather difficult to understand.
12.4 Operation hour and parts count display
General
This function displays the integrated power-on time, the integrated cycle operation
time, the integrated cutting time and timer (started by an input signal from PMC)
on the screen. The integrated cycle opereation time, the integrated cutting time
and timer can be altered and preset, During addition to the above, this function
displays the count of the total number of parts machined, the number of parts
required and the number of completed parts on the screen. Each time M02, M30
or a parameter set M code is executed, the count of the total number of parts
machined and the number of parts compelted is incremented by 1. If the count of
the number of parts machined reaches the number of parts required, a signal is
output to the PMC side. It is possible for the operator to change and preset the
number of parts required and the number of parts completed.
Signal Target part count reached signal
PRTSF <F061#1>
[
Classfication
] Outptu signal
[
Function
] Reports to the PMC that the specified number of parts have been
machined.
[
Output conditions
] The PRTSF signal is set to when :
z Machining of the specified number of parts has been completed.