GSK 218M, Руководство по подключению и программированию PLC

Страница: 157 / 227

GSK218M CNC System Connection and PLC Manual
154
N0. ： data list number, cannot be changed.
ADDRESS
：
data list address, cannot be changed.
DATA ： data list setting value, can be changed during MDI mode.
Data/serial number: displaying input data. The serial number appears by pressing
<
SEARCH
> on the panel to search the data. The CNC returns to the
data displaying interface after press <CANCEL>.
MDI mode: current operation mode.
【
Esc
】 ：
return to the up menu.
Press <
CHANGE
> to download the setting value to operation the CNC. When the change is
completed, the system displays: CTR Downloaded OK ! , when the change is not completed,
the system displays: Can’t download !
(Note: press
【
CHANGE
】
after modification to save the modification and operation the CNC.
Press the Page Up/Page Down, four Direction keys to search and position, view or modify the
data list address.
3.4 Keep relay
Press
【
KPAR
】 during Fig. 3-1 to enter the view and the setting interface of counter as Fig. 3-4-1.
ADDR N.7 N.6 N.5 N.4 N.3 N.2 N.1 N.0
K000 0 0 0 0 0 1 0 1
K001 0 0 0 0 1 0 0 1
K002 0 0 0 0 0 0 0 0
K003 0 0 0 0 0 0 0 0
K004 0 0 0 0 0 0 0 0
K005 0 0 0 0 0 0 0 0
K006 0 0 0 0 0 0 0 0
K007 0 0 0 0 0 0 0 0
K008 0 0 0 0 0 0 0 0
K009 0 0 0 0 0 0 0 0
K010 0 0 0 0 0 0 0 0
K011 0 0 0 0 0 0 0 0
PLCPara
MDI
RUN
DATA
【CTR】 【TMR】 【DATA】
【RETURN】 【KPAR】
Fig. 3- 4- 1
Contents and operations on keep relay interface: ：
RNU
：
operation state of ladder.
ADDR ： keep relay address.