GSK 218M, Руководство по подключению и программированию PLC

Страница: 224 / 227

GSK218M CNC System Connection and PLC Manual
221
When D1 and D2 are set to 8, and T8M6 is executed, the system alarms.
F. Time parameter setting related to the tool magazine:
Addresss Statement Setting range Initial value (ms)
T0004 Delay timer for spindle
positioning
More than or less than 0 0
T0007 Delay timer for spindle tool
releasing completion More than or equal to 0 0
T0008 Delay timer for spindle tool
clamping completion More than or equal to 0 0
T0009 Time setting for spindle tool
releasing check More than releasing tool
time
8000
T0010 Time setting for spindle tool
clamping check More than clamping tool
time 8000
T0013 Time setting for spindle
positioning check
More than positioning
time 8000
T0018 Time setting for spindle
positioning delay check
Related to the
positioning width 2000
T0100 Delay time 1 for turret tool
magazine manually roating
More than rotating one
tool selection 2000
T0101 Delay time 2 for turret tool
magazine manually roating More than rotating one
tool selection 2000
T0102 Delay check time for turret tool
magazine stopping More than rotating one
tool selection 2000
T0103 Delay check time for tool
magazine rotating More than rotating one
tool selection 3000
T0104 Delay check time for turret tool
magazine infeed More than infeed time 10000
T0105 Delay check time for turret tool
magazine retracting More than retraction
time 10000
T0106 Delay timer for turret tool
magazine infeed completion More than or equal to 0 0
T0107 Delay timer for turret tool
magazine retraction completion More than or equal to 0 0
Notes:
1. The above parameter(TMR) is related to the tool magazine type, the tool
magazine speed and other performances. Please refer to the tool magazine
performance to properly set the parameter.
2. when the above parameter (TMR) setting is not proper, the system alams to cause
that the tool change is not executed normally.
The ladder match with the tool magazine after the above A-F steps are operated, but the
tool magazine cannot normally run, the tool magazine executes the CCW, CW, infeed and
retraction in Manual mode to check whether each operation of tool magazine is normal