GSK 218M, Руководство по подключению и программированию PLC

Страница: 174 / 227

GSK218M CNC System Connection and PLC Manual
171
normally close contact is OFF.
5 IN05 X0.5 Z-axis negative travel limit switch is enabled when the
normally close contact is OFF.
18 IN06 X0.6 4-axis positive travel limit switch is enabled when the
normally close contact is OFF.
6 IN07 X0.7 4-axis negative travel limit switch is enabled when the
normally close contact is OFF.
8 IN08 X1.0 X-axis positive travel limit switch is enabled when the
normally close contact is OFF.
21 IN09 X1.1 Y-axis zero return deceleration switch is enabled when
the normally close contact is OFF.
9 IN10 X1.2 Z-axis zero return deceleration switch is enabled when
the normally close contact is OFF.
22 IN11 X1.3 4-axis zero return deceleration switch is enabled when
the normally close contact is OFF.
24 IN12 X1.4 The emergency stop switch is enabled when the
normally close contact is OFF.
12 IN13 X1.5 The external cycle start is enabled when the normally
close contact is OFF.
25 IN14 X1.6 The external feed hold is enabled when the normally
close contact is OFF.
13 IN15 X1.7 The press check switch is enabled when the normally
close contact is OFF.
XS44 input 2
Pin Markign Label Function
1 IN16 X2.0 The lubricant low is enabled when the normally close
contact is OFF.
14 IN17 X2.1 The tool change permission is enable when the
normally close contact is OFF.
2 IN18 X2.2 -axis zero return deceleration switch is enabled when
the normally close contact is OFF.
15 IN19 X2.3 -axis zero return deceleration switch is enabled when
the normally close contact is OFF.
17 IN20 X2.4 Undefined
5 IN21 X2.5 The tool release check is enabled when the normally
close contact is OFF.
18 IN22 X2.6 The tool clamp check is enabled when the normally
close contact is OFF.
6 IN23 X2.7 The spindle overheat is enabled when the normally
close contact is OFF.
8 IN24 X3.0 Undefined
21 IN25 X3.1 Undefined
9 IN26 X3.2 Undefined