GSi EVO-50, Руководство по монтажу, Страница: 41 / 222

Chapter 4: Assembling the Sidewall Sheets
Outer Sheet Caulking Instructions for Laced Lamination
To help keep the moisture out between the laminated sidewall sheets, it is necessary to apply caulking
over each set of stiffener holes and at the ends of the laminated outer sidewall sheet.
1. Apply a strip of caulking (4) over the stiffener holes on the outer sheet (1O).
NOTE: The caulking strips (4) should be applied to the full height of the sheet, from the top
horizontal seam to the bottom horizontal seam.
2. Apply a vertical strip of caulk (2) between the outside edge of the outer sheet (1O) and first row of
holes and another vertical strip (2) between the first and second row of holes.
3. For 20-15 gauge and 14-10 gauge laminates:
a. Extend the caulk (3) horizontally 13" (33 cm) between the edge of the sheet and first horizontal
seam hole at the top right of outer sheet (1O).
b. Apply a horizontal strip of caulk (5) between the overlapping vertical seam edge and first
horizontal seam hole at both the ends of the outer sheet (1O). The length of the caulk strip (5)
varies between 7.5" (19 cm) and 13" (33 cm).
NOTE: Do not extend this caulking (5) into the overlapping vertical seam area.
Figure 4-5 Caulking between 4-stagger laminated sheets
1O Outer sidewall sheet 4
1/8" x 1-1/4" caulking strip (stiffener hole) (S-10716)
2
1/8" x 1/4" caulking strip (vertical) (S-4458)
5
1/8" x 1-1/4" caulking strip (horizontal – 7.5" to 13")
(S-10716)
3
1/8" x 1/4" caulking strip (horizontal – 13")
(S-4458)
PNEG-5490D-2X 90' Diameter EVO-50 Beam 2X Bin 41