Installation and operating manual
G932.1 - 06/2010
EN-15
EN
EN
13
Shutting down
13.1
Work breaks
The hoist must be secured in the following way during work
breaks:
–
Put the load lifting equipment on the ground or cordon off
the area beneath the suspended load.
–
Interrupt the power supply and secure the hoist against
unauthorised use.
13.2
Temporary shutdown
If the hoist is not required for several days or weeks but should
remain mounted in the same position and location, the hoist must
be secured as follows:
–
Put the load lifting equipment on the ground or cordon off
the area beneath the suspended load.
–
Secure the load lifting equipment against oscillating move-
ments (e.g. tie to building).
–
Pull up the rope without load to a position out of the reach of
people.
–
Interrupt the power supply and secure the hoist against
unauthorised use.
13.3
Permanently decommissioning
–
Dismantle the hoist and accessories, see '
12 Dismantling'
on page 14.
–
Clean the outside of the device and store.
14
Transport and storage
14.1
Hoists
Transport
Prevent the hoist from being damaged while it is being trans-
ported.
On-site, the hoist can be transported using the carrying handle,
see Fig. 1. If necessary transport with the help of a second per-
son.
Heavy hoists can be transported using suitable transport equip-
ment on the eye bolts or ring nuts.
Utilise the transport box when transporting with a vehicle. Secure
the hoist or the transport box with lashing straps.
Storage
Store in a dry, dust-free location that has a constant ambient
temperature.
14.2
Rope
Transport
–
Protect the ropes against direct sunlight, chemicals, soiling
and mechanical damage.
–
Transport the ropes on the reels whenever possible.
–
Use suitable auxiliary equipment when transporting the reels.
–
Rolled-up ropes without reels should be lifted and trans-
ported using a lifting strap.
–
Minimise the load resulting from the dead weight as much
as possible.
Storage
–
Store lightly oiled, free of dust and in a dry location.
–
Avoid contact with chemicals (e.g. battery acid).
–
Store without applying mechanical crushing, pressure or
tensile stress.
15
Maintenance work
15.1
Authorized maintenance personnel
DANGER!
Risk of falling! Risk of being injured by falling objects!
Mortal danger due to incorrectly performed maintenance and
service work!
Maintenance and service work which require the hoist to be
opened may only be performed by the following authorised
parties:
–
Greifzug Hebezeugbau GmbH
–
Lifting equipment service companies authorised by
Greifzug Hebezeugbau GmbH
–
Service personnel trained and certified by Greifzug He-
bezeugbau GmbH
15.2
Mandatory inspections
A written certificate is required for the annual inspection and any
exceptional tests. The inspections must be recorded in the log-
book included with delivery.
Prior to every use
Always check to ensure that the device is in an orderly working
condition before use, see '
9.4 Commissioning' on page 12.
Annual safety inspection
The safety inspection must be carried out annually.
The safety inspection may only be undertaken by authorised
maintenance personnel, see '
15.1 Authorized maintenance per-