General Music S2 Turbo, Руководство пользователя

Страница: 97 / 304

81
2. Activate the “Wheel”, “Pedal” or “Footswitch” parameters. In the keyboard models,
the first part of the multiple parameter can determine which Pedal/Footswitch input
will receive one or the other type of Foot controllers:
3.
Select the second part of the parameter, which represents the M
IDI
message generated
by the pedal/footswitch or by the wheel:
Pedal 1 controls Main Volume (controller 7)
The M
IDI
message assignable to the pedals and footswitches differ owing to the
different nature of the two controllers. The assignment of a specific M
IDI
message
depends on the nature of the pedal selected. The Reference section lists the messages
assignable to each controller.
How to activate/deactivate the pedals and wheels for the tracks
1.
Access page 3 of
EDIT PERFORMANCE
/
TRACKS
:
Edit Performance/Tracks, page 3 (S2/S3)
Edit Performance/Tracks, page 3 (S2R)
2.
Select the track that you are interested in editing.
3. Set the selected controller (wheel, pedal, footswitch) to “On” or “---” (Off).
Save the modifications to the Performance
The modifications made to the current Performance must be saved to avoid losing them
when you select another Performance or re-select the same Performance.
Select the Save Performance command in the main display and confirm the procedure
with
ENTER
. You can memorise the modifications to the current Performance, to another
Performance of the same Bank/Song, or of a different Bank/Song.
If you select a different Performance, bear in mind that the Performance that will be
replaced will be irremediably lost.
Furthermore, for future use, save the updated Bank/Song to floppy disk or to R
AM
-disk;
remember that turning off the instrument will result in the loss of the modified Perform-
ance.
(8) Editing the Performance