General Music S2 Turbo, Руководство пользователя

Страница: 193 / 304

177
Set dynamic switch The dynamic threshold that divides the two levels. This sets the maximum dynamic level of
the first level. 126 and 127 exclude the second level.
Value range: 0 ... 127.
Copy to level (x) Copies the entire programmed status of level 1 to level 2, or vice versa.
Suggestion: Use this command to differentiate just a few notes between the two levels; for
example, only the roll of a Drumkit.
1. Programme level 1, note by note, with all the instruments of the drumkit. Insert the “Roll”
in D2:
2. With the “Copy to #2” command, copy all the programming of level 1 to level 2.
3. Pass on to the second level, in the second page of the display, and access the edit of
note D2:
4. Assign the Sound “Snare Drum 1” to note D2 of the second level:
Save Saves the Sound Patch/Drumkit.
1. Select the command. The Sound Library entry page is displayed:
2. Select an empty location.
3. If necessary, change the name of the Sound Patch using “Name”.
If the original Sound Patch is a Rom-Sound, the Music Processor automatically attaches an
asterisk (*) after the new name in order to avoid duplications of the name in the Sound
Library.
4. Press
ENTER
to save the SoundPatch.
Abort Erases all the modifications made to the Sound Patch and escapes from edit mode.
Catch note Assigns the note played on the keyboard to the “Key Note” parameter.
To be rendered operative, S2R must be controlled via M
IDI
-C
OMMON
.
1. Select the command. The following message appears on the display:
2. Play the note you wish to assign to the “Key Note” parameter.
Parameters
Key Note Shows the note currently in edit in the active level. Use the
DIAL
or the command “Catch
note” to select the note.
Sound Determines the sound assigned to the note.
Volume Determines the Volume of the edited note.
Value range: 0 ... 127.
(7) SoundPatch e Drumkit