General Music S2 Turbo, Руководство пользователя

Страница: 151 / 304

135
1. Press Create . The following dialogue window will appear:
2. Enter the track number you wish to create (1 ... 16). The option “All” appears after the
number 16. “All” creates all the tracks (resetting the values of the existing tracks to default
settings).
Copy Copies the selected track to another track or to all the tracks.
Value range: 1 ... 16, All.
1. Press Copy . The following dialogue window will appear:
2. Enter the track number to copy (1 ... 16). The option “All” appears after the number 16.
“All” copies to all the tracks.
Delete Cancels the selected track, removing it from the track column.
Note: It is not possible to cancel a track of a Performance that is exploited by a Song
present in the current Bank/Song.
Hint: Use this command to cancel tracks which are not used in the Performance. If you
erroneously cancel a track you can undo the operation with “Revert”.
Revert Cancels the last “Create”, “Copy” or “Delete” operation carried out.
Page 1: Configuration
Page editors The Configuration page shows four icons, which are graphic representations of the complex
parameters. Each icon represents one of the four Sources
LOCAL
/
MIDI
-
COMMON
and
MIDI IN
and the Destinations
GENERATION
and
MIDI OUT
.
The icons can be selected by rotating the
DIAL
. To gain access to the icon’s incorporated
text parameters, simply select the required icon and tap on
ENTER
. To escape an icon edit,
tap on
ENTER
or press
EXIT
once.
LOCAL
/
MIDI
-
COMMON
Source. When the arrow is shown the track is connected to the key-
board or to the controlling device connected to the Midi-Common (master keyboard, guitar
controller, Midi accordion...).
Select the icon and press
ENTER
to disconnect or connect the Source.
MIDI IN
Source. When the arrow is shown the track is connected to the Midi In (non M
IDI
-
C
OMMON
channels). Select the icon and press
ENTER
to connect or disconnect the Source and
to access the text parameters
IN
and
CH
.
IN
M
IDI
I
N
port to which the track is connected. Select the icon with the
DIAL
and press
ENTER
to access this parameter:
Enter the number of the M
IDI
I
N
port (1 or 2). Press
ENTER
to pass on to the next parameter.
CH
M
IDI
I
N
channel assigned to the track. You can enter this parameter either from the
previous parameter, or by selecting the icon and pressing
ENTER
twice.
(4) Edit Performance/Tracks