General Music S2 Turbo, Руководство пользователя

Страница: 74 / 304

58 PRACTICAL GUIDE
Save all the Bank/Songs in a Group
A disk can contain up to 10 Groups of 10 Bank/Song each. The 10 Bank/Songs contained
in memory is saved to one of the Groups present on disk. The empty Groups are identi-
fied by an asterisk (*) after the Group number.
1.
If you are saving to floppy disk, insert a formatted disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Save page appears, press the
LEFT OR RIGHT MULTIFUNCTION
BUTTON REPEATEDLY
to go to the Save page:
4.
Select the destination element to save to (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNCTION SELECT B
):
5. Select the Group where the Bank/Songs contained in memory are going to be saved by
pressing the corresponding
FUNCTION SELECT KEY
repeatedly, until the number of the
required Group appears next to the name of the selected element. An asterisk (*)
shows a completely empty Group.
6.
Specify number 4, corresponding to the “Save all Bank/Song” operation. The instru-
ment requests confirmation of the current operation:
7. Press
ENTER
to confirm (or
EXIT
to annul). All Songs and Performances contained in the
selected Group will be cancelled and substituted by the incoming data from memory.
Save a single Bank/Song
A single Bank/Song consists of a Song and a Bank of 10 Performances (maximum). The
destination Group in the disk where the Bank/Song will be saved must be specified.
1.
If you are saving to floppy disk, insert a formatted disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Save page appears, press the
LEFT OR RIGHT MULTIFUNCTION
BUTTON REPEATEDLY
to go to the Save page:
4.
Select the destination element to save to (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNCTION SELECT B
):