General Music S2 Turbo, Руководство пользователя

Страница: 220 / 304

204 REFERENCE GUIDE
Page 1: Midi (1)
Midi Common Activates/Deactivates the M
IDI
-C
OMMON
, and assigns it a M
IDI
channel.
ch The Midi channel assigned to the Midi-Common. This channel cannot be used to
control a single track in standard M
IDI
mode. If it is “Off”, the Midi-Common is deactivated.
Value range: Off, 1 ... 16.
in the In port of the M
IDI
-C
OMMON
channel. If this parameter is set to “---” (Off), the incoming
Midi-Common is deactivated.
Value range: Off (---), 1, 2.
out The Out port of the Midi-Common channel. If the parameter is set to “---” (Off), the
outgoing Midi-Common is deactivated.
Default: 1. Value range: Off (---), 1, 2.
Note: If the M
IDI
-C
OMMON
is deactivated, the S2R will be deprived of the Local Source. In
such a case, you can only control the individual tracks of the expander with a M
IDI
channel
for each track.
Midi Merge Activates/deactivates the M
IDI
M
ERGE
function. M
IDI
M
ERGE
addresses all M
IDI
signals re-
ceived at M
IDI
I
N
to the M
IDI
O
UT
:
Local
Midi In
Track 1
Midi Out
(In normal conditions, only the signals generated by the Local Source are directed to the
M
IDI
O
UT
, while signals from the M
IDI IN
Source are directed to the internal generation and
would then be redirected only to M
IDI
T
HRU
).
Default: Off (---). Value range: On, Off (---).
System Exclusive Midi filter Activates/deactivates the transmission and reception of the System Exclusive. When it is
“On” this
filter prevents the transmission and reception of S.E.
Default: On. Value range: On, Off (---).
Midi Extended Prog Change The S Series P
ROGRAM
C
HANGE
consists of two parts, in the form
xxx-yyy:
• the principal number (part xxx), transmitted as a P
ROGRAM
C
HANGE
;
• the secondary number (part
yyy), transmitted as B
ANK
S
ELECT
(or
Midi Controller 0).
In some cases, the secondary number ( Bank Select) may interfere with other data in the
receiving device, above all if it is an outdated instrument non capable of receiving Bank
Select data, therefore it can be filtered from the Midi data stream in transmission. If the
parameter is “Off” the secondary number is
filtered and not transmitted.
Default: On. Value range: On, Off (---).
Clock out M
IDI
C
LOCK
O
UT
synchronises the Tempo of an instrument connected to the M
IDI
O
UT
of the
Music Processor with the M
IDI
C
LOCK
of the Music Processor. If this parameter is “On”, the
Tempo is sent to the M
IDI
O
UT
and can synchronise the receiving instrument (sequencer,
rhythm unit, instrument with automatic accompaniments...).
Default: On. Value range: On, Off (---).
Midi channel lock Assigns the M
IDI
channels programmed in the next page to the tracks of any Performance,
overriding the individual settings of each Performance.
M
IDI
editor, Page 2 M
IDI
editor, Page 1