General Music S2 Turbo, Руководство пользователя

Страница: 88 / 304

72 PRACTICAL GUIDE
7
C
REATE OR MODIFY THE
B
ANK
/S
ONGS
The 10 Bank/Songs of the Music Processor are already programmed to suit many “stand-
ard” playing situations. The Bank/Songs can, however, be modified to meet particular
needs by changing the Performances, or by recording Songs.
The Song contained in a Bank/Song exploits the Performances of the same Bank/Song. A
Performance should be programmed in relation to the sonic requirements of the Song that
will be recorded later. The Performances provide Songs with changes of Sound assigned
to the tracks, of Effects, of Panorama at the outputs and of the individual track volumes.
Cancel Song 1 (Demo)
A demonstration Song (Song 1 -Demo) is present in memory by default. If you want to
liberate this location and conserve only the Performances of the Bank/Song, you must
cancel the Song.
1.
If necessary, select Bank/Song 1.
2.
Press the
SONG
button in the Edit section to access the Playback display or the
EDIT SONG
environment.
3. If the Playback display appears, select the “Edit” command (with
FUNCTION SELECT KEY
B
) to gain access to
EDIT SONG
:
4.
Select the “Erase Song” command. Confirm “Are you sure?” with
ENTER
to cancel the
Song 1 (Demo).
Prepare a start-up disk to power up without
Song 1 (Demo)
Even after having cancelled it, Song 1 (Demo) is always restored to memory each time
the instrument is turned on (with the R
AM
-disk empty and no floppy disk inserted in the
disk drive - default situation). This is because the Song is memorised in R
OM
, and cannot
be permanently cancelled.
To impede the Song’s reappearance, you can prepare a “start-up” disk in the following
manner:
1.
Cancel the Demo Song using the method described above.
2.
Press
DISK
to access
DISK
mode:
Playback display Main
EDIT SONG
display