General Music S2 Turbo Скачать руководство пользователя страница 230

Страница: 230 / 304

214

REFERENCE GUIDE

The Disk environment pages (Load, Save, Erase, Utility)

The

DISK

environment consists of four pages (Load, Save, Erase, Utility), each with

similar functions.

Load

Commands/options

Standard commands/options (disk, ramdisk, new disk, directory).

Load all

Loads the entire contents of the disk. Loads the Bank/Songs of the Group selected.

Important: the contents of the memory will be cancelled and replaced by the data being
loaded.

Load all setup

Loads all the Setups (General, Sound Library, Effects Libraries, Clipboard).

Load single setup

Loads one of the Setups.

1. Select “Load single setup”. The directory of the Setups on the disk selected is displayed

“Load single setup”. In this disk the Clipboard
is not present.

2. Select the Setup to load and confirm the operation.

Important: Loading a Setup from disk modifies the instrument’s operating mode. For
example, the General Setup can alter the M

IDI

-C

OMMON

status, a Sound Library may change

the Sounds used by the tracks.

Load all bank/song

Loads all the Bank/Songs of the Group selected.

Load single bank/song

Loads one of the Bank/Songs of the Group selected.

1. Select the “Load single bank/song” procedure. The directory of the Bank/Songs contained

in the currently selected Group is displayed. (You can press

EXIT

to interrupt the operation,

and then select a different Group to repeat the operation).

“Load — select source”. Directory of the
Bank/Songs included in the selected Group (on disk).

2. Select the Bank/Song to load and confirm. The directory of the Bank/Songs in memory is

displayed:

“Load — select destination”. Directory of
the Bank/Songs present in memory.

3. Select the Bank/Song destination and confirm.

Important: The Bank/Song occupying the location (if any) will be replaced by the incoming
Bank/Song.

Load User Program

Loads one of the User Programs on the floppy disk.

1. Select “Load User Program”. The directory of the User Programs on the floppy disk is

displayed.

2. Select the User Program to load and confirm.

Содержание S2 Turbo

















































































































































































































































































































Результаты поиска

Содержание S2 Turbo

Отзывы:

Похожие инструкции для S2 Turbo

Бренды по названию

Популярные бренды

General Music S2 Turbo, Руководство пользователя

Результаты поиска

Содержание S2 Turbo

Отзывы:

Похожие инструкции для S2 Turbo

Бренды по названию

Популярные бренды