General Music S2 Turbo, Руководство пользователя

Страница: 188 / 304

172 REFERENCE GUIDE
Save
Saves the Waveform created in a new Sound. Only samples which have been assigned an
extension limit with the “Assign” command are saved in the Waveform.
The new Waveform is added at the end of the list of Waveforms (accessed in
EDIT SOUND
from
the W
AVESET
editor) and may be used to create other new Sounds.
1. Select the command and enter the name of the Waveform:
2. Press
ENTER
to confirm and enter the name of the Sound:
3. Press
ENTER
to confirm and select a location in the Sound Library where the new Sound can
be saved (form
Bank Select-Program Change, xxx-yyy):
(Sample Translator displays only empty locations of the Sound Library).
Assign
Once loaded, a sample will play across its entire note range. This command assigns a note
range to the selected sample, delimited by a low note and a high note.
The keyboard zones to which the samples are assigned cannot be superimposed.
Note: Only the assigned samples become part of the Waveform and are saved at the end
of the edit operations in Sample Translator.
1. Select the command. The following selection window is displayed:
2. Play the lowest note (or rotate the
DIAL
) and press
ENTER
. Play the highest note (or rotate the
DIAL
) and press
ENTER
.
Once the assign procedure has been completed, the lowest note of the scale, the original
sample pitch and the highest note of the scale are displayed next to the name of the
sample.
UnAssign
Erases all the extension limits of the currently selected sample.