General Music S2 Turbo, Руководство пользователя

Страница: 114 / 304

98 PRACTICAL GUIDE
Select the Sounds via the Performance
Change event
If the sequencer or master keyboard that you are using is not able to transmit the Bank
Select message (Control Change 0), it will not be possible to select Sounds with Program
Change numbers other than the type XXX-1 and, therefore, not the “variation” of the
basic Sounds.
You can, however, program your Performances accordingly, and select them with a
Performance Program Change message.
You must activate the M
IDI
-C
OMMON
channel and assign it one of the 16 M
IDI
channels,
bearing in mind that the channel assigned can no longer be used for instrument data.
Programming the M
IDI
-Common channel
1. Press the
GENERAL
button to access
EDIT GENERAL
:
2. Specify 3 on the
NUMERIC KEYPAD
to access the “Midi” editor:
3.
Press 1 to activate the edit of the “Midi Common” parameter:
4. Specify the required M
IDI
channel, for example, channel 16; and press
ENTER
:
5. Press
ENTER
three times to confirm the programming:
6.
Press
NORMAL
to return to the main display:
Select the Performances via M
IDI
-C
OMMON
Dedicate one of the tracks of the external sequencer’s song for the purpose of sending
Performance Program Change data (assigned the same M
IDI
channel as the M
IDI
-C
OMMON
).
Insert the relative Program Change number slightly before the point where the Perform-
ance has to change.
The table in the following page shows the Program Change numbers that correspond to
the 100 Performances of the S Series.
Track
dedicated
to the con-
trol of the
Performance
External
Sequencer
Musicprocessor
MIDI -
Common