General Music S2 Turbo, Руководство пользователя

Страница: 79 / 304

63
5. Select the required M
IDI
-file and confirm. The list of the Bank/Songs contained in
memory appears:
6. Select a memory destination where the file will be loaded and confirm with
ENTER
. If
you select an occupied location, the existing Bank/Song will be cancelled and substi-
tuted by the M
IDI
-file.
7. The M
IDI
-file will be converted to an S Series standard Song. A new Bank will be
created with only one Performance (1), with standard programmed values.
8. Assign the correct Sounds to the tracks of the Performance and carry out all the
operations necessary to optimise the converted Song (particularly the track transpose
and track volume settings).
Save a M
IDI
-file
You’ll need an Atari/M
S
-D
OS
formatted floppy disk. If you don’t have one on hand, you
can initialise a disk to the required format using procedures 2 and 3 in the Disk Utility
page. Consult the Disk chapter in the Reference section.
The more recent computers are able to make use of disks with a greater capacity (1.44 Mb
- HD type disks). The 720 kb format is used by the Atari ST computer non fitted with the
drive for HD floppies.
1.
Press the
DISK
button to gain access to the
DISK
environment and go to the Utility page:
2.
Select the “Save Midi standard file” operation. You are invited to insert an Atari/M
S
-
D
OS
disk containing the M
IDI
-file:
3.
Insert the floppy into the drive and press
ENTER
. The list of the Bank/Songs contained
in memory is shown:
(4) Load and save a M
IDI
-file