General Music S2 Turbo, Руководство пользователя

Страница: 181 / 304

165
Detailed procedure Follow these steps to access and modify the parameters:
1. Tap
ENTER
to select one of the parameters “Segment”, “Time”, “Level”.
2. Rotate the
DIAL
to select a segment or to modify its duration or level. You can
enter a “Time” and “Level” value on the
NUMERIC KEYPAD
.
3. Press
ENTER
to select the next parameter. After “Level” you will return to
“Segment”.
4. Select “Add segm.” to add a new segment after the selected segment. Select
“Del. segm.” to cancel the selected segment.
Page 4: Pan Tracking (DC and DO Sounds)
Options These three options permit you to divide the Tracking “curve” into different segments, in
order to permit a more or less refined programming of the Tracking across the keyboard.
1 segm 1 segment. The Tracking is essential and provides a constant variation of the Pan
across the keyboard. The “Key” parameter cannot be modified.
3 segm 3 segments. The Tracking consists of 3 segments which create a curve with
different variations across the keyboard.
6 segm 6 segments. The Tracking curve is greatly divided, allowing a complex program-
ming of the completion velocity variation across the keyboard.
Parameters The three parameters displayed across the bottom part of the Tracking curve can be
accessed by tapping repeatedly on
ENTER
. The selected parameter can be modified with the
DIAL
(the “Key” and “Level” parameters also with the
NUMERIC KEYPAD
).
point One of the extreme ends of a segment. Rotation of the
DIAL
selects one of the points
of the Tracking curve (1, 2, or 1, 2, 3, 4, or 1, 2, 3, 4, 5, 6, 7).
key Determines the keyboard position for the point in edit. The extreme points (A#0, C8)
cannot be modified.
level The Pan offset (the position with respect to the centre). This parameter determines
the starting position of the Pan across the keyboard extension, and represents the actual
value upon which the Pan Envelope acts.
Value range: -50 … 0…+50.
Detailed procedure
Follow the steps set out below to access and edit the Tracking
parameters:
1. Tap
ENTER
to select one of the parameters “Point”, “Key” (if possible), or
“Level”.
2. Rotate the
DIAL
to select a P
OINT
, to change the K
EY
note or modify the L
EVEL
.
3. Press
ENTER
to pass on to the next parameter. After “Level” you will return to
“Point”.
Pan Control
(Sound SO)
Pan Controls (SO Sounds)
Pan Position of the Pan. Use the
DIAL
or the
NUMERIC KEYPAD
to modify this graphic parameter. “0”
corresponds to the central position.
Value range: -31 (All Left) ... +31 (All Right).
(5) Edit Sound