General Music S2 Turbo, Руководство пользователя

Страница: 148 / 304

132 REFERENCE GUIDE
Rotary Initial velocity of Rotary modulation. When the DSP receives the MIDI Control Change 90
message, the Rotary velocity passes gradually from
slow to fast or vice versa.
Value range: Slow or Fast.
Wheel 1 MIDI message generated by Wheel 1 (left). Wheel 1 is spring loaded and returns automati-
cally to its central position after use, and it is therefore advisable to assign parameters with
neutral values at the centre (Pitch Bend, Pan).
Value range: see table at the end of the chapter.
Wheel 2 MIDI message generated by Wheel 2 (right). Wheel 2 is not spring loaded but is centre-
dented for quick recognition of the central position.
Value range: see table at the end of the chapter.
Page 3: User Keys (S2/S3)
Keys 1 ... 7 Function assigned to the buttons in the
FUNCTION CONTROLLERS
section when the led on the
USER
/
PANEL
button is ON.
Value range: see table at the end of the chapter.
V Value assigned to the function when the User Key is pressed. The Control Change
messages 64 ... 79 cannot be controlled by these keys.
T The Track activated by the User Key. This parameter appears only for MIDI channel
messages (Program Change, Volume, Pan, Damper...).
Page 4: User Controllers
(S2/S3)
Sliders 1 ... 7 The function assigned to the cursors of the
FUNCTION CONTROLLERS
when the led on the
USER
/
PANEL
button is ON.
Value range: see table at the end of the chapter.
Page 2: Controllers (S2R)
Pitch Bend Sensitivity Maximum Pitch Bend excursion in semitones (for messages received via M
IDI
).
Value range: -12 ... +12.
Footswitch 1 M
IDI
message generated by Footswitch 1.
Note: The footswitch polarity can be set in EDIT General.
Value range: see table at the end of the chapter.
Footswitch 2 As described above.
Rotary Initial velocity of the Rotary modulation. When the DSP receives the M
IDI
Control Change 90
message, the Rotary velocity passes gradually from slow to fast or vice versa.
Value range: Slow or Fast.
Page 3: Function Controller (S2R)
The Function Controller page shows a series of horizontal bars which can be modified with
the
DIAL
, each corresponding to one of the tracks displayed. The bars represent the value of
the parameter selected in the option column.
Parameters Volume, Attack, Release, Filter 1, Filter 2, Pan.
F.C. Reset Resets the Attack, Release, Filter 1 and Filter 2 values to their default settings.
Page 2: Controllers (S2R) Page 3: Function Controller (S2R)