General Music S2 Turbo, Руководство пользователя

Страница: 71 / 304

55
5. Select the required Bank/Song Group, by pressing the corresponding
FUNCTION SELECT
KEY
repeatedly. If at least one Bank/Song is present on disk, the number of the relative
Group will appear next to the name of the selected element.
6. Specify number 5, corresponding to the “Load single Bank/Song” operation. The list
of Bank/Songs present in disk contained in the selected Group appear in the display:
7. Specify the number corresponding to the required Bank/Song to load (‘0’ corresponds
to Bank/Song 10). The list of the 10 Bank/Song memory destination slots is displayed:
8. Specify the number corresponding to the Bank/Song destination slot. If the selected
location already contains a Bank/Song, this will be cancelled and substituted by the
incoming Bank/Song.
The “Are you sure?” display is shown:
9.
Press
ENTER
to confirm (or
EXIT
to annul).
Load a Setup
There are four Setups: General, Sound Library, Effects Library, Clipboard. A disk can
contain one Setup of each type (for ex.. a single Sound Library and a single General).
The most frequency loaded setup it the Sound Library.
1. If you are loading from floppy disk, insert the disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Load page appears, press the
LEFT MULTIFUNCTION BUTTON
repeatedly ( = previous page ) to go to the Load page:
4. Select the source element to load from (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNC
-
TION SELECT B
):
To navigate in the menus,
you can (1) specify the
number corresponding to
the menu item, or (2)
select the item with the
DIAL
and press
ENTER
to confirm
the selection.
(S. “Overview of the
instrument and its edit/
data handling capacity”).
(2) Load the disk contents into memory