General Music S2 Turbo, Руководство пользователя

Страница: 133 / 304

117
4. The display will show a “close-up” of the section selected:
Return to full vision of the sample with the UnZoom command.
“Gain”
This allows you to modify the volume of the sample with respect to the other samples of
the Waveform. Select Gain. A small window appears on the display where you can insert
the relative volume of the sample. The volume is expressed as a percentage of the maxi-
mum volume possible:
Insert the desired value with the
DIAL
or the numeric keypad, and confirm with
ENTER
.
You will have to wait for a few seconds while the new sample volume is being calcu-
lated:
The undo button can be used to revert to the original volume setting and back to the
modified volume, so that you can compare results.
“Loop nr:(x)”
This command allows you to display the “Loop Start” and “Loop End” points of the eight
loops that can be received, for example, with an Akai sample.
Although the S Series can use only the first loop of a sample, Sample Translator can also
modify the “Start” and “End” points of the other loops (from the Info About display).
These changes can be used by a sampler to which the sample can be sent with the Send
command.
“Send”
The sample can be sent to a sampler or a computer. Check that these connections have
been made:
• The Music Processor’s MIDI OUT 1 socket to the MIDI IN socket of external device;
• The Music Processor’s MIDI IN 1 socket to the MIDI OUT socket of external device.
Prepare the external device for sample reception. Program channel 1 as the reception
channel. Press Send to transmit the sample:
The “Play Single” display