General Music S2 Turbo, Руководство пользователя

Страница: 163 / 304

147
W
AVESET
editor, Page 1 (Dual Oscillator Sounds, DO ) W
AVESET
editor, Page 2 (Dual Oscillator Sounds, DO)
Waveset
The Waveset editor provides access to the principal control parameters of the
Waveform, that is, the basic waveform of the Sound.
Waveform (Sound Dual Crossfade)
Waveform Basic waveform of the Sound. Here you can select one of the 209 Rom Waveforms, or a
Waveform loaded in memory with a Ram-Sound, or one created with the S
AMPLE
T
RANSLATOR
(Waveforms numbered from 210 onwards).
The Waveforms are numbered progressively and can be selected by specifying their
number. The list of Rom-Waveforms appears in the Appendix.
Transpose Transposes the Waveform in semitones.
Value range: -64 ... +64.
Detune Detune creates an equal and opposite pitch offset between two oscillators in steps of 1/64th
of a semitone. The pitch of one of the oscillators is increased while the pitch of the other one
is decreased. Positive values correspond to an increase of Oscillator 1.
When you convert the Sound to an SO type, this parameter it transformed to Fine Pitch,
which will probably require an adjustment.
Value range: -64 ... +64.
Note: With most of the Waveforms, the “Pitch depth” (s.) of the two Oscillators can be
separated only if Detune has any value other than 0. In Sounds based on these Waveforms
it is possible, for example, to increase the Pitch of Osc.1 while the Pitch of Osc.2 is
lowered.
When Detune = 0, however, the Pitch Envelope of Osc.2 follows that of Osc.1, regardless
of the status of the “Pitch depth ch 2” parameter.
At the end of this chapter is a table of the Rom-Waveforms which allow a different program-
ming of the Pitch Envelope even when Detune = 0.
Pitch touch sensitivity Sensitivity of Pitch to Aftertouch variations. The Pitch of the Sound can be varied by apply-
ing pressure on the notes of the keyboard after
key on.. Positive values increase the Pitch
while negative ones have the inverse effect.
Value range: -7 (lowest sensitivity = -2 semitones) ... +7 (highest sensitivity = +2 semi-
tones).
Waveform (Single Oscillator Sound)
Waveform Basic waveform of the Sound. Here you can select one of the 209 Rom Waveforms, or a
Waveform loaded in memory with a Ram-Sound, or one created with the S
AMPLE
T
RANSLATOR
(Waveforms numbered from 210 onwards).
The Waveforms are numbered progressively and can be selected by specifying their
number. The list of Rom-Waveforms appears in the Appendix.
Transpose Transposes the Waveform in semitones.
Value range: -64 ... +64.
W
AVESET
editor (Dual Crossfade Sounds, DC) W
AVESET
editor (Single Oscillator Sounds, SO)
(5) Edit Sound