GE Portrait Hub01, Руководство пользователя

Страница: 153 / 198

Alarm specifications
lost, Network connection lost alarms are generated on the Hub and on the Viewer
(delays reported below).
The determination of an alarm condition has nominal factors (such as signal quality
and movement artifact) that may affect the ability to derive the parameter value.
The following disclosures list the alarm system delays as an average and include the
delay of the first activated priority alarm.
Alarms with alarm delays of more than 10 s are specified with the average, minimum,
and maximum values obtained from five trial measurements.
NOTE
Any alarm delays that are less than 5 s are given as <5 s.
Alarm delay specifications for impedance respiration
alarms
The following table lists the alarm delays for physiological alarms related to the impedance
respiration measurement. Any alarm delays that are less than 5 s are given as <5 s.
Physiological alarms
Alarm Limit range Limit increment Alarm delay
Apnea 10 to 60 s 1 s
32 s (average) (32 to 32 s range)
RR high 4 to 80 breaths
per minute 1 breath per
minute 32 s (average) (32 to 33 s range)
RR low 4 to 80 breaths
per minute 1 breath per
minute 24 s (average) (24 to 25 s range)
Technical alarms
Alarm Alarm delay
Change Resp battery 50 s (average) (45 to 57 s range)
Check Resp patch 30 s (average) (30 to 31 s range)
Clean Resp battery interface
<5 s
No Resp battery
<5 s
Resp battery low 48 s (average) (41 to 55 s range)
Resp connection lost 10 s (average) (9 to 10 s range)
Resp device overheating
<5 s
Weak Resp connection
<5 s
5815148-01
Portrait ™ Mobile Monitoring Solution
153