GE Portrait Hub01, Руководство пользователя

Страница: 114 / 198

Cleaning, disinfection, and care
Device Visual inspection Cleaning Disinfection
Hub, sensors, sensor
batteries, charger
●
Before and after each
patient use
●
Before and after
cleaning or
disinfection
●
After each patient use
●
When in use and
visible soil is present
●
After each patient use
●
Perform disinfection
after cleaning, not
before
●
Always consider your
hospital guidelines as
well
Alarming unit
●
Before and after use
●
Before and after
cleaning
●
Monthly and when
visible soil is present
●
Not needed
Cleaning
General cleaning instructions
Follow these instructions to clean the device and other non-applied parts unless the
other parts provide part-specific instructions. Non-applied parts refer to those parts of
the system that are not in direct contact with the patient.
Cleaning points to note
●
Warranty does not cover any damages caused by using substances or methods
not approved by GE.
●
Always dilute cleaning and disinfectant agents according to their manufacturer’s
instructions. Always consider your hospital guidelines as well.
●
Your hospital guidelines permitting, all cleaning and disinfection activities can
be carried out at the bedside.
●
Do not let liquid pool around connection pins. If this should happen, blot dry with a
soft, non-linting cloth.
●
Do not use excessive drying techniques, such as oven, forced heat, or sun drying.
●
Do not spray cleaner directly on the display screen.
●
Never connect any device or applied part to a patient until it is thoroughly dry.
●
If you discover any signs of deterioration or damage in the device, discontinue its
use.
Permitted detergents
The following permitted detergents can be used to clean the device and other
non-applied parts unless there are separate part-specific instructions. Non-applied
parts refer to those parts of the system that are not in direct contact with the patient.
●
CaviWipes wipes
●
Super Sani-Cloth (purple top)
114
Portrait ™ Mobile Monitoring Solution
5815148-01