GE CARESCAPE Monitor B850 Скачать руководство пользователя страница 124

Страница: 124 / 192

CARESCAPE Monitor B850

116

2106778-001

Select

Information >

Device Information

Verify that the device information is correct:



The connected parameter modules are identified.



The connected CARESCAPE Network ID interfaces are identified.



The connected USB input devices are identified.

Stay connected to Webmin.

8.3.4 Configuration Information

Select

Information >

Configuration Information

Verify that the patient monitor is correctly configured:



The host Information is correct.



The active software package is correct.



The correct host licenses are enabled.



The correct PDM licenses are enabled.



Patient ID prefix is correctly configured.



Unit and Bed name are correctly configured.



S/5 printers are correctly configured.



IX printers and printer locations are correctly configured.



Remote service is correctly configured.



National requirements are correctly configured.



Network is correctly configured.



Power Line Frequency is correctly configured.



MUSE/12SL is correctly configured.



Citrix is correctly configured.

Log out Webmin.

8.3.5 Trim knob, keypad, and remote

Perform the applicable steps for all the connected displays and for the optional remote
controller.
1.

Press any hard key in the keypad or remote and verify that the selected menu is opened
on the screen or the selected activity is started.

Rotate the

Trim Knob

control in either direction to move from option to option on the

display until you have an active parameter window or main menu item highlighted. Press
the

Trim Knob

control once to select the highlighted option. Verify that the selected

menu is opened on the screen or the selected activity is started.

Select

to close any open menu and return to the main display.

8.3.6 Mouse

Perform this test only if a mouse is connected to the patient monitor.
1.

Move the mouse until the pointer (arrow) is over an active parameter window or a main
menu item you wish to select and click the left mouse button once to select it.

Select

to close the open menu and return to the main display.

Содержание CARESCAPE Monitor B850

































































































































































































Результаты поиска

Содержание CARESCAPE Monitor B850

Отзывы:

Похожие инструкции для CARESCAPE Monitor B850

Бренды по названию

Популярные бренды

GE CARESCAPE Monitor B850, Руководство по обслуживанию

Результаты поиска

Содержание CARESCAPE Monitor B850

Отзывы:

Похожие инструкции для CARESCAPE Monitor B850

Бренды по названию

Популярные бренды