GE CARESCAPE Monitor B850, Руководство по обслуживанию

Страница: 41 / 192

System introduction
33
2106778-001
In order to maintain the declared EFUP, the product shall be
operated normally according to the instructions and
environmental conditions as defined in the product manual, and
periodic maintenance schedules specified in Product
Maintenance Procedures shall be followed strictly.
Consumables or certain parts may have their own label with an
EFUP value less than the product. Periodic replacement of those
consumables or parts to maintain the declared EFUP shall be
done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal
waste, and must be collected separately and handled properly
after decommissioning.
This symbol indicates that this electronic information product
does not contain any hazardous substance or elements above
the maximum concentration value established by the Chinese
standard GB/T 26572, and can be recycled after being discarded,
and should not be casually discarded.
Underwriters Laboratories product certification mark.
Canada only. Industry Canada certification number indicates
that this product meets the applicable Industry Canada technical
specifications.
China only. Chinese Compulsory Certification as required by
AQSIQ. Safety & EMC compliance.
China only. China Ministry of Industry and Information
Technology identification number for Radio Transmission
Equipment Type Approval.
Australia only. The product complies with the applicable
Australian standard and establishes a traceable link between the
equipment and the manufacturer, importer or their agent
responsible for compliance.
Japan only. The PSE mark (Product Safety Electric Appliance and
Materials) is a mandatory mark required on Electrical Appliances
in Japan as authorized by the Electrical Appliance and Material
Safety Law (DENAN). This mark signifies that a product complies
with the law according to a set of standards for electric devices.
Japan only. Approved under Japan TELEC requirements.
The following symbols appear on one or more of the devices.
IC
CMIIT ID