GE HEALTHCARE CARESCAPE Monitor B650, Техническое руководство

Страница: 162 / 240

CARESCAPE Monitor B650
154
2062973-002
2. For more detailed information, select Advanced tab .
NOTE: Refer to the Module Frames and Modules Technical Manual for information about PDM
battery.
11.7 Error messages and codes
The following error messages display in the message field if there is a problem with the patient
monitor.
Refer to the patient monitor’s user’s manual for a complete list of system messages. Refer to
Module Frames and Modules Technical Manual for a list of parameter module specific error
messages.
Battery Quality "OK" The full capacity of the battery is more than
50% compared to the full capacity of a new
battery.
"Condition" Battery requires conditioning.
"Replace" The full capacity of the battery is less than or
equal to 50% compared to the full capacity of a
new battery.
"N/A" Battery is not connected to the patient monitor.
Field Description
Remaining capacity (mAh) Remaining capacity of the battery in mAh.
Full capacity (mAh) Full capacity of the battery in mAh.
Full capacity compared to new (%) Full capacity of the battery compared to the
nominal full capacity of a new battery.
Cycle count The total count of charging and discharging
cycles of the battery.
Voltage (V) Battery voltage.
Current (mA) Battery current. Positive when charging,
negative when discharging.
Temperature (°C or °F) Battery temperature.
Message Possible causes Possible solutions
License expired A trial license has expired. Enable the license with a new
activation code, if needed.
Configuration
changes. Restart
required Pending configuration
changes to platform settings
that require patient monitor
restart. Power cycle the patient monitor.
Network down No other network device
observed on the MC Network. Verify that the patient monitor is
connected to an active network.
Field Status Description