GE HEALTHCARE CARESCAPE Monitor B650, Техническое руководство

Страница: 85 / 240

Configuration
77
2062973-002
3. In the Time Configuration window, in Configure Date and Time , update the following
fields as needed:
•
Date
• Month
• Year
• Hour:Minute
• AM/PM
• 12/24 Hrs
4. Select Save .
The manual time configuration takes effect immediately.
7.4 Setting unit and bed name
Configure the care unit name and bed name for patient monitors that are configured to
connect to the MC Network.
NOTE: The unit name shall be set the same with all the patient monitors and CARESCAPE CIC
Pro central stations that are connected to the same care unit in the MC Network. Bed name
shall be unique to each patient monitor in the same care unit.
NOTE: Unit and bed name selections are not available if network selection is S/5.
1.
Log in to Webmin.
2. Select Configuration > Unit and Bed Name .
3. In the Unit and Bed Name Configuration window, view or set the unit name and bed
name for the device.
NOTE: Use only capital letters A - Z, numbers, dash (-), asterisk (*) and space ( ). The unit name
may be up to seven characters long and bed name up to five characters long.
4.
Select Save .
The unit and bed name configuration takes effect immediately.
7.5 Configuring printers
You can configure the patient monitor to print to up to 12 laser printers connected on the IX
Network. Use the Webmin sub-modules to install or delete a printer and to print a test page.
NOTE: Ensure that you have the host name(s) or IP address(es) for all the connected IX printers
available. Configure the IX printers according to this information.
NOTE: Laser printers that are installed on central stations do not need to be configured using
Webmin. Refer to the user’s manual for details on configuring the printer.
NOTE: This Webmin module is available only if the monitor is equipped with the Advanced
Interface Board that provides both the MC and the IX Network interfaces.
NOTE: Refer to the CARESCAPE Modular Monitors Supplemental Information Manual for the list
of supported devices.
7.5.1 Installing a printer
1. Log in to Webmin.
2. Select Configuration > Printers .
3. In the Sub-Modules for Printers menu, select Install Printer .