manualshive.com logo in svg

GE Grid Solutions F60, Инструкция по эксплуатации

KELCO F60 - комплексное решение для вашего дома. Установите его с помощью руководства по установке. Скачайте бесплатное руководство пользователя прямо сейчас с manualshive.com и наслаждайтесь всеми возможностями этого продукта. Удобный и надежный - KELCO F60 ваш верный помощник.

Поделиться
Скачать
background image

5-290

F60 Feeder Protection System

GE Multilin

5.8 INPUTS/OUTPUTS

5 SETTINGS

5

The latching output contacts are mechanically bi-stable and controlled by two separate (open and close) coils. As such they
retain their position even if the relay is not powered up. The relay recognizes all latching output contact cards and populates
the setting menu accordingly. On power up, the relay reads positions of the latching contacts from the hardware before exe-
cuting any other functions of the relay (such as protection and control features or FlexLogic).

The latching output modules, either as a part of the relay or as individual modules, are shipped from the factory with all
latching contacts opened. It is highly recommended to double-check the programming and positions of the latching con-
tacts when replacing a module.

Since the relay asserts the output contact and reads back its position, it is possible to incorporate self-monitoring capabili-
ties for the latching outputs. If any latching outputs exhibits a discrepancy, the 

LATCHING OUTPUT ERROR

 self-test error is

declared. The error is signaled by the 

LATCHING OUT ERROR

 FlexLogic operand, event, and target message.

•

OUTPUT H1a OPERATE

: This setting specifies a FlexLogic operand to operate the ‘close coil’ of the contact. The

relay will seal-in this input to safely close the contact. Once the contact is closed and the 

RESET

 input is logic 0 (off),

any activity of the 

OPERATE

 input, such as subsequent chattering, will not have any effect. With both the 

OPERATE

 and

RESET

 inputs active (logic 1), the response of the latching contact is specified by the 

OUTPUT H1A TYPE

 setting.

•

OUTPUT H1a RESET

: This setting specifies a FlexLogic operand to operate the ‘trip coil’ of the contact. The relay will

seal-in this input to safely open the contact. Once the contact is opened and the 

OPERATE

 input is logic 0 (off), any

activity of the 

RESET

 input, such as subsequent chattering, will not have any effect. With both the 

OPERATE

 and 

RESET

inputs active (logic 1), the response of the latching contact is specified by the 

OUTPUT H1A TYPE

 setting.

•

OUTPUT H1a TYPE

: This setting specifies the contact response under conflicting control inputs; that is, when both the

OPERATE

 and 

RESET

 signals are applied. With both control inputs applied simultaneously, the contact will close if set to

“Operate-dominant” and will open if set to “Reset-dominant”.

Figure 5–140: CONTACT INPUT/OUTPUT MODULE TYPE 4L CONTACT 1 LOGIC

Application Example 1:

A latching output contact H1a is to be controlled from two user-programmable pushbuttons (buttons number 1 and 2). The
following settings should be applied.

Program the Latching Outputs by making the following changes in the 

SETTINGS 



 INPUTS/OUTPUTS 



 CONTACT OUT-

PUTS 

 CONTACT OUTPUT H1a

 menu (assuming an H4L module):

OUTPUT H1a OPERATE:

 “

PUSHBUTTON 1 ON

”

OUTPUT H1a RESET:

 “

PUSHBUTTON 2 ON

”

Program the pushbuttons by making the following changes in the 

PRODUCT SETUP 



 USER-PROGRAMMABLE PUSHBUT-

TONS 



 USER PUSHBUTTON 1

 and 

USER PUSHBUTTON 2

 menus:

PUSHBUTTON 1 FUNCTION:

 “Self-reset”

PUSHBUTTON 2 FUNCTION:

 “Self-reset”

PUSHBTN 1 DROP-OUT TIME:

 “0.00 s”

PUSHBTN 2 DROP-OUT TIME:

 “0.00 s”

MESSAGE

OUTPUT H1a RESET:

Off

Range: FlexLogic operand

MESSAGE

OUTPUT H1a TYPE:

Operate-dominant

Range: Operate-dominant, Reset-dominant

MESSAGE

OUTPUT H1a EVENTS:

Disabled

Range: Disabled, Enabled

FLEXLOGIC OPERAND

Cont Op 1 Closed

SETTING

= Operate-dominant

CONTACT OUTPUT H1a TYPE

SETTING

= On

CONTACT OUTPUT H1a 
OPERATE

AND

SETTING

= On

CONTACT OUTPUT H1a RESET

= Reset-dominant

Non-volatile,
Set-dominant

Latch

S

R

Non-volatile,
Set-dominant

Latch

S

R

H1a

H1b

AND

Close

Open

OR

OR

On

859744A1.vsd

Содержание F60





































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F60

Sears LXI 626.54908590 Series Owner'S Manual preview
LXI 626.54908590 Series
Бренд: Sears Страницы: 28
Vetter KOALA Series Mounting Instructions preview
KOALA Series
Бренд: Vetter Страницы: 2
GE Multilin UR Series N60 Instruction Manual preview
UR Series N60
Бренд: GE Multilin Страницы: 574
RCA P52950 User Manual preview
P52950
Бренд: RCA Страницы: 64
RMS 1S20-FAB Manual preview
1S20-FAB
Бренд: RMS Страницы: 21
Magnavox 55P8241 Brochure preview
55P8241
Бренд: Magnavox Страницы: 2
Falltech 5410A5 User Instruction Manual preview
5410A5
Бренд: Falltech Страницы: 2
Black Box SP386A Manual preview
SP386A
Бренд: Black Box Страницы: 4
Eaton ARCON 2.0 Series Operation And Configuration Instructions. Technical Description preview
ARCON 2.0 Series
Бренд: Eaton Страницы: 85
Waxman LeakSmart Water Valve Installation & Operation Manual preview
LeakSmart Water Valve
Бренд: Waxman Страницы: 20
U-Line Leighting L3 Instructions preview
Leighting L3
Бренд: U-Line Страницы: 3
Sony KP-E41 Operating Instructions Manual preview
KP-E41
Бренд: Sony Страницы: 28
Sony KL-40WA1 Service Manual preview
KL-40WA1
Бренд: Sony Страницы: 42
Sony KDS-Z60XBR5 Operating Instructions Manual preview
KDS-Z60XBR5
Бренд: Sony Страницы: 59
Siemens SIPROTEC 7SJ531 Instruction Manual preview
SIPROTEC 7SJ531
Бренд: Siemens Страницы: 362
Panasonic TX-43P250 Service Manual preview
TX-43P250
Бренд: Panasonic Страницы: 39
CANUSA-CPS GTS-PE Installation Manual preview
GTS-PE
Бренд: CANUSA-CPS Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды