manualshive.com logo in svg

GE Grid Solutions F60, Инструкция по эксплуатации

KELCO F60 - комплексное решение для вашего дома. Установите его с помощью руководства по установке. Скачайте бесплатное руководство пользователя прямо сейчас с manualshive.com и наслаждайтесь всеми возможностями этого продукта. Удобный и надежный - KELCO F60 ваш верный помощник.

Поделиться
Скачать
background image

GE Multilin

F60 Feeder Protection System

5-311

5 SETTINGS

5.10 TESTING

5

5.10TESTING

5.10.1 TEST MODE

PATH: SETTINGS 



 TESTING 

 TEST MODE

The F60 provides a test facility to verify the functionality of contact inputs and outputs, some communication functions and
the phasor measurement unit (where applicable), using simulated conditions. The test mode is indicated on the relay face-
plate by a Test Mode LED indicator.

The test mode may be in any of three states: disabled, isolated, or forcible.

In the “Disabled” mode, F60 operation is normal and all test features are disabled.

In the “Isolated” mode, the F60 is prevented from performing certain control actions, including tripping via contact outputs.
All relay contact outputs, including latching outputs, are disabled. Channel tests and phasor measurement unit tests remain
usable on applicable UR-series models.

In the “Forcible” mode, the operand selected by the 

TEST MODE FORCING

 setting controls the relay inputs and outputs. If the

test mode is forcible, and the operand assigned to the 

TEST MODE FORCING

 setting is “Off”, the F60 inputs and outputs oper-

ate normally. If the test mode is forcible, and the operand assigned to the 

TEST MODE FORCING

 setting is “On”, the F60 con-

tact inputs and outputs are forced to the values specified in the following sections. Forcing may be controlled by manually
changing the operand selected by the 

TEST MODE FORCING

 setting between on and off, or by selecting a user-programma-

ble pushbutton, contact input, or communication-based input operand. Channel tests and phasor measurement unit tests
remain usable on applicable UR-series models.

Communications based inputs and outputs remain fully operational in test mode. If a control action is programmed
using direct inputs and outputs or remote inputs and outputs, then the test procedure must take this into account.

When in “Forcible” mode, the operand selected by the 

TEST MODE FORCING

 setting dictates further response of the F60 to

testing conditions. To force contact inputs and outputs through relay settings, set 

TEST MODE FORCING

 to “On”. To force con-

tact inputs and outputs through a user-programmable condition, such as FlexLogic operand (pushbutton, contact input,
communication-based input, or a combination of these), set 

TEST MODE FORCING

 to the desired operand. The contact input

or output is forced when the selected operand assumes a logic 1 state.

The F60 remains fully operational in test mode, allowing for various testing procedures. In particular, the protection and
control elements, FlexLogic, and communication-based inputs and outputs function normally.

The only difference between the normal operation and the test mode is the behavior of the input and output contacts. The
contact inputs can be forced to report as open or closed or remain fully operational, whereas the contact outputs can be
forced to open, close, freeze, or remain fully operational. The response of the contact input and output contacts to the test
mode is programmed individually for each input and output using the force contact inputs and force contact outputs test
functions described in the following sections.

The test mode state is indicated on the relay faceplate by a combination of the Test Mode LED indicator, the In-Service LED
indicator, and by the critical fail relay, as shown in the following table.



 SETTINGS



 TESTING

TEST MODE

FUNCTION: Disabled

Range: Disabled, Isolated, Forcible

MESSAGE

TEST MODE FORCING:

On

Range: FlexLogic operand

NOTE

Содержание F60





































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F60

3M DBI-SALA Sealed-Blok 3400800 User Instructions preview
DBI-SALA Sealed-Blok 3400800
Бренд: 3M Страницы: 15
hager BD163T User Instructions preview
BD163T
Бренд: hager Страницы: 2
Philips ACM067 User Manual preview
ACM067
Бренд: Philips Страницы: 140
COMPERE KPM83B User Manual preview
KPM83B
Бренд: COMPERE Страницы: 24
STI STI-6514 Installation preview
STI-6514
Бренд: STI Страницы: 2
RCA R61WH76 Specifications preview
R61WH76
Бренд: RCA Страницы: 2
RCA P52950 Brochure & Specs preview
P52950
Бренд: RCA Страницы: 4
Chamberlain LiftMaster Professional Retroreflector Photo Eye Protector System CPS-RN4 Owner'S Manual preview
LiftMaster Professional Retroreflector Photo Eye Protector System CPS-RN4
Бренд: Chamberlain Страницы: 5
ABB relion REF615 Product Manual preview
relion REF615
Бренд: ABB Страницы: 56
ACO Haustechnik ACO Quatrix-K 620368 Installation Information preview
ACO Quatrix-K 620368
Бренд: ACO Haustechnik Страницы: 32
K&K M4700B Quick Start Manual preview
M4700B
Бренд: K&K Страницы: 4
Woodward MRM4 Manual preview
MRM4
Бренд: Woodward Страницы: 460
SEIKEL 1461 0025 Installation Manual preview
1461 0025
Бренд: SEIKEL Страницы: 4
Middle Atlantic Products PD-215 Instruction Sheet preview
PD-215
Бренд: Middle Atlantic Products Страницы: 4
Contech CatStop Quick Start Manual preview
CatStop
Бренд: Contech Страницы: 2
AGF Collect and Drain 5100A Owner'S Manual preview
Collect and Drain 5100A
Бренд: AGF Страницы: 8
AGF COLLECTanDRAIN 5400 Owner'S Manual preview
COLLECTanDRAIN 5400
Бренд: AGF Страницы: 12
Anest Iwata AIRFED MASK 2020 User Instruction Manual preview
AIRFED MASK 2020
Бренд: Anest Iwata Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды