manualshive.com logo in svg

GE Grid Solutions F60, Инструкция по эксплуатации

KELCO F60 - комплексное решение для вашего дома. Установите его с помощью руководства по установке. Скачайте бесплатное руководство пользователя прямо сейчас с manualshive.com и наслаждайтесь всеми возможностями этого продукта. Удобный и надежный - KELCO F60 ваш верный помощник.

Поделиться
Скачать
background image

GE Multilin

F60 Feeder Protection System

C-1

APPENDIX C 

C.1 OVERVIEW

C

APPENDIX C IEC 61850 COMMUNICATIONSC.1OVERVIEW

C.1.1 INTRODUCTION

The IEC 61850 standard is the result of electric utilities and vendors of electronic equipment to produce standardized com-
munications systems. IEC 61850 is a series of standards describing client/server and peer-to-peer communications, sub-
station design and configuration, testing, environmental and project standards. The complete set includes:

•

IEC 61850-1: Introduction and overview

•

IEC 61850-2: Glossary

•

IEC 61850-3: General requirements

•

IEC 61850-4: System and project management

•

IEC 61850-5: Communications and requirements for functions and device models

•

IEC 61850-6: Configuration description language for communication in electrical substations related to IEDs

•

IEC 61850-7-1: Basic communication structure for substation and feeder equipment - Principles and models

•

IEC 61850-7-2: Basic communication structure for substation and feeder equipment - Abstract communication service
interface (ACSI)

•

IEC 61850-7-3: Basic communication structure for substation and feeder equipment – Common data classes

•

IEC 61850-7-4: Basic communication structure for substation and feeder equipment – Compatible logical node classes
and data classes

•

IEC 61850-8-1: Specific Communication Service Mapping (SCSM) – Mappings to MMS (ISO 9506-1 and ISO 9506-2)
and to ISO/IEC 8802-3

•

IEC 61850-9-1: Specific Communication Service Mapping (SCSM) – Sampled values over serial unidirectional multi-
drop point to point link

•

IEC 61850-9-2: Specific Communication Service Mapping (SCSM) – Sampled values over ISO/IEC 8802-3

•

IEC 61850-10: Conformance testing

These documents can be obtained from the IEC (

http://www.iec.ch

). It is strongly recommended that all those involved with

any IEC 61850 implementation obtain this document set.

C.1.2 COMMUNICATION PROFILES

IEC 61850 specifies the use of the Manufacturing Message Specification (MMS) at the upper (application) layer for transfer
of real-time data. This protocol has been in existence for several of years and provides a set of services suitable for the
transfer of data within a substation LAN environment. Actual MMS protocol services are mapped to IEC 61850 abstract ser-
vices in IEC 61850-8-1.

The F60 relay supports IEC 61850 server services over TCP/IP. The TCP/IP profile requires the F60 to have an IP address
to establish communications. These addresses are located in the 

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



NETWORK

 menu. It is possible to have up to five simultaneous connections (in addition to DNP and Modbus/TCP (non-IEC

61850) connections).

•

Client/server

: This is a connection-oriented type of communication. The connection is initiated by the client, and com-

munication activity is controlled by the client. IEC 61850 clients are often substation computers running HMI programs
or SOE logging software. Servers are usually substation equipment such as protection relays, meters, RTUs, trans-
former tap changers, or bay controllers.

•

Peer-to-peer

: This is a non-connection-oriented, high speed type of communication usually between substation equip-

ment such as protection relays. GSSE and GOOSE are methods of peer-to-peer communication.

•

Substation configuration language (SCL)

: A substation configuration language is a number of files used to describe

the configuration of substation equipment. Each configured device has an 

IEC Capability Description

 (ICD) file. The

substation single line information is stored in a 

System Specification Description

 (SSD) file. The entire substation con-

figuration is stored in a 

Substation Configuration Description

 (SCD) file. The SCD file is the combination of the individ-

ual ICD files and the SSD file.

Содержание F60





































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F60

Bushnell VAULT BABINPCT Manual preview
VAULT BABINPCT
Бренд: Bushnell Страницы: 7
Westfalia 82 55 79 Instruction Manual preview
82 55 79
Бренд: Westfalia Страницы: 22
Toshiba 72HM196 - 72" Rear Projection TV Specification preview
72HM196 - 72" Rear Projection TV
Бренд: Toshiba Страницы: 2
Toshiba 72MX195 Specification preview
72MX195
Бренд: Toshiba Страницы: 2
Toshiba 72HM195 Specification preview
72HM195
Бренд: Toshiba Страницы: 2
Toshiba 65HM167 - 65" Rear Projection TV Specification preview
65HM167 - 65" Rear Projection TV
Бренд: Toshiba Страницы: 2
Toshiba 65H82 Specifications preview
65H82
Бренд: Toshiba Страницы: 2
Toshiba ColorStream TP50G60 Service Manual preview
ColorStream TP50G60
Бренд: Toshiba Страницы: 8
Toshiba 65H82 Supplementary Manual preview
65H82
Бренд: Toshiba Страницы: 4
Toshiba 72HM195 Service Manual preview
72HM195
Бренд: Toshiba Страницы: 14
Toshiba ColorStream TZ50V61 Service Manual preview
ColorStream TZ50V61
Бренд: Toshiba Страницы: 50
Toshiba DLP 50HM66 Operating Manual preview
DLP 50HM66
Бренд: Toshiba Страницы: 55
Toshiba DLP 44HM85 Owner'S Manual preview
DLP 44HM85
Бренд: Toshiba Страницы: 57
Toshiba 65HM167 - 65" Rear Projection TV Service Manual preview
65HM167 - 65" Rear Projection TV
Бренд: Toshiba Страницы: 47
Toshiba CX36H64 Owner'S Manual preview
CX36H64
Бренд: Toshiba Страницы: 60
Toshiba ColorStream CN36H97 Owner'S Manual preview
ColorStream CN36H97
Бренд: Toshiba Страницы: 56
Toshiba ColorStream TP50G60 Owner'S Manual preview
ColorStream TP50G60
Бренд: Toshiba Страницы: 60
Toshiba ColorStream TP61G90 Owner'S Manual preview
ColorStream TP61G90
Бренд: Toshiba Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды