manualshive.com logo in svg

GE Grid Solutions F60, Инструкция по эксплуатации

KELCO F60 - комплексное решение для вашего дома. Установите его с помощью руководства по установке. Скачайте бесплатное руководство пользователя прямо сейчас с manualshive.com и наслаждайтесь всеми возможностями этого продукта. Удобный и надежный - KELCO F60 ваш верный помощник.

Поделиться
Скачать
background image

5-24

F60 Feeder Protection System

GE Multilin

5.2 PRODUCT SETUP

5 SETTINGS

5

5.2.2 DISPLAY PROPERTIES

PATH: SETTINGS 

 PRODUCT SETUP 



 DISPLAY PROPERTIES

Some relay messaging characteristics can be modified to suit different situations using the display properties settings.

•

LANGUAGE

: This setting selects the language used to display settings, actual values, and targets. The setting dis-

plays when a language other than English was purchased, and the range depends on the order code of the relay.

•

FLASH MESSAGE TIME

: Flash messages are status, warning, error, or information messages displayed for several

seconds in response to certain key presses during setting programming. These messages override any normal mes-
sages. The duration of a flash message on the display can be changed to accommodate different reading rates.

•

DEFAULT MESSAGE TIMEOUT

: If the keypad is inactive for a period of time, the relay automatically reverts to a

default message. The inactivity time is modified via this setting to ensure messages remain on the screen long enough
during programming or reading of actual values.

•

DEFAULT MESSAGE INTENSITY

: To extend phosphor life in the vacuum fluorescent display, the brightness can be

attenuated during default message display. During keypad interrogation, the display always operates at full brightness.

•

SCREEN SAVER FEATURE 

and

 SCREEN SAVER WAIT TIME

: These settings are only visible if the F60 has a liquid

crystal display (LCD) and control its backlighting. When the 

SCREEN SAVER FEATURE

 is “Enabled”, the LCD backlighting

is turned off after the 

DEFAULT MESSAGE TIMEOUT

 followed by the 

SCREEN SAVER WAIT TIME

, providing that no keys

have been pressed and no target messages are active. When a keypress occurs or a target becomes active, the LCD
backlighting is turned on.

•

CURRENT CUT-OFF LEVEL

: This setting modifies the current cut-off threshold. Very low currents (1 to 2% of the

rated value) are very susceptible to noise. Some customers prefer very low currents to display as zero, while others
prefer the current be displayed even when the value reflects noise rather than the actual signal. The F60 applies a cut-
off value to the magnitudes and angles of the measured currents. If the magnitude is below the cut-off level, it is substi-
tuted with zero. This applies to phase and ground current phasors as well as true RMS values and symmetrical compo-
nents. The cut-off operation applies to quantities used for metering, protection, and control, as well as those used by
communications protocols. Note that the cut-off level for the sensitive ground input is 10 times lower that the 

CURRENT

CUT-OFF LEVEL

 setting value. Raw current samples available via oscillography are not subject to cut-off.

•

VOLTAGE CUT-OFF LEVEL

: This setting modifies the voltage cut-off threshold. Very low secondary voltage measure-

ments (at the fractional volt level) can be affected by noise. Some customers prefer these low voltages to be displayed
as zero, while others prefer the voltage to be displayed even when the value reflects noise rather than the actual sig-
nal. The F60 applies a cut-off value to the magnitudes and angles of the measured voltages. If the magnitude is below
the cut-off level, it is substituted with zero. This operation applies to phase and auxiliary voltages, and symmetrical

 DISPLAY

 PROPERTIES

LANGUAGE:

English

Range: English; English, French; English, Russian;

English, Chinese; English, German
(range dependent on order code)

MESSAGE

FLASH MESSAGE

TIME: 1.0 

s

Range: 0.5 to 10.0 s in steps of 0.1

MESSAGE

DEFAULT MESSAGE

TIMEOUT: 300 s

Range: 10 to 900 s in steps of 1

MESSAGE

DEFAULT MESSAGE

INTENSITY: 25 %

Range: 25%, 50%, 75%, 100%

Visible when a VFD is installed

MESSAGE

SCREEN SAVER

FEATURE: Disabled

Range: Disabled, Enabled

Visible when an LCD is installed

MESSAGE

SCREEN SAVER WAIT

TIME: 30 min

Range: 1 to 65535 min. in steps of 1

Visible when an LCD is installed

MESSAGE

CURRENT CUT-OFF

LEVEL: 0.020 pu

Range: 0.002 to 0.020 pu in steps of 0.001

MESSAGE

VOLTAGE CUT-OFF

LEVEL: 1.0 V

Range: 0.1 to 1.0 V secondary in steps of 0.1

Содержание F60





































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F60

ZDS DRP Version 2.0-BLUE Installation & Operating Instructions Manual preview
DRP Version 2.0-BLUE
Бренд: ZDS Страницы: 20
LG 3828VA0531D Owner'S Manual preview
3828VA0531D
Бренд: LG Страницы: 44
LG RT-52 Service Manual preview
RT-52
Бренд: LG Страницы: 52
LG 44/52SZ8R Service Manual preview
44/52SZ8R
Бренд: LG Страницы: 52
LG 44SZ51D Owner'S Manual preview
44SZ51D
Бренд: LG Страницы: 36
LG RT-44/48/52SZ50LP Service Manual preview
RT-44/48/52SZ50LP
Бренд: LG Страницы: 47
LG RT-48SZ40RB Service Manual preview
RT-48SZ40RB
Бренд: LG Страницы: 51
LG RT-52SZ30RB Service Manual preview
RT-52SZ30RB
Бренд: LG Страницы: 50
ABB Relion REG670 Product Manual preview
Relion REG670
Бренд: ABB Страницы: 146
Zenith Z56DC1D - 56" DLP HDTV Installation And Operating Manual, Warranty preview
Z56DC1D - 56" DLP HDTV
Бренд: Zenith Страницы: 47
Magnavox 6P4841 Owner'S Manual preview
6P4841
Бренд: Magnavox Страницы: 60
GE 869 Communications Manual preview
869
Бренд: GE Страницы: 436
Samsung PCL 6215R Service Manual preview
PCL 6215R
Бренд: Samsung Страницы: 157
Samsung HLS5679WX/XAA Brochure & Specs preview
HLS5679WX/XAA
Бренд: Samsung Страницы: 4
ABB REB670 Series Applications Manual preview
REB670 Series
Бренд: ABB Страницы: 476
ABB Relion 650 Series REB650 Technical Manual preview
Relion 650 Series REB650
Бренд: ABB Страницы: 568
GE LM10 Instruction Manual preview
LM10
Бренд: GE Страницы: 106
Sony GRAND WEGA KDS-R60XBR2 Service Manual preview
GRAND WEGA KDS-R60XBR2
Бренд: Sony Страницы: 262

Бренды по названию

Популярные бренды

Загрузить еще бренды