Furuno FV-110GX, Руководство оператора

Страница: 33 / 188

Site preparation
2-9
3. Allow sufficient space so the nut is free of the welded seam and there is room for tools
(min. 50 mm).
4. Use the dimensions in the following figure to prepare the mast flange for mounting of
the ADU.
CAUTION! Avoid sharp edges where the flange is in
direct contact with the radome. Round all edges as much as
possible to avoid damaging the surface of the radome.
Figure 2-8: ADU mast flange, distance to the welded seam
Figure 2-9: ADU, bottom view
50
W
elded seam
W
elded seam
Gusset plate
Allow sufficient space so the
nut is free of the welded seam
and there is room for tools
(min. 50 mm).
Clearance hole
for M12 bolts
New antenna
Current antenna
R326
248
ø350
247.5
247.5
N-Connector
164.5
247.5
247.5
452
270.5
72.5
M12
ø350