Furuno FV-110GX, Руководство оператора

Страница: 66 / 188

Introduction to the built-in web interface
5-2
If you want to use another LAN port to access the web interface you must configure it
as described in
To configure the LAN network on page 5-23.
3. Open your Internet browser and enter the IP address of the ACU. The default IP
address is http://192.168.0.1.
When the login screen is displayed you have verified that the connection to the FV-
110GX can be established. The web interface is ready for use.
First time login as administrator
For a new installation you must activate local administration and set the admin password.
This is also the case after reset to factory default.
Do as follows:
1. On the ACU keypad, push and hold the left arrow key for 5 seconds.
2. Wait for the very short display of Local administration , followed by the event text:
0807F-0 WARNING Local administration enabled .
This will give you temporary administrator access for 1 hour or until next restart .
3. Open your browser and access the web interface.
4. Enter user name: admin (no password is required).
The DASHBOARD is displayed.
5. To enter or change the password select ADMINISTRATION > User login and locate
the section Change Login .
6. If needed, type in the new password (minimum 8 characters) and click Change . No
old password is required.
After the 1 hour window or a restart the administrator password is required.
If you cannot establish a connection there might be problems with the Proxy server
settings of your PC. See
Proxy server settings in your browser on page 7-4 for further
information.
Figure 5-1: LAN 3 connector used for configuring the FV-110GX
0RGHP
6HUYLFHSRUW
8VHU,QWHUQHWHWF
6KLS¶VQHWZRUN
Figure 5-2: Logon screen
Note
Accessing the ACU with the local administration function
does not change the current administrator password.