Furuno FV-110GX, Руководство оператора

Страница: 105 / 188

Keypad and menus of the ACU
: 5-41
Example: EVENT 1/4* : This is the first event out of a list of 4 and there has been a
change in the list. EVENT 1/4 will always be shown, the * indicates that
there has been a change.
5.5.4 Brightness of the display
To adjust the brightness do the following:
1. Press and hold OK for a short moment until BRIGHTNESS XXX% is displayed
(XXX is the current brightness value).
2. Hold OK p press for lighter or for darker display.
3. Release OK to leave the brightness menu.
5.5.5 Power-cycle of the ACU and ADU
To power cycle the ACU and ADU do the following:
1. Press and hold and until the ACU display shuts down and the ACU and ADU
reboots.
BUC LO 28.05 GHz, system hardware
EVENT
menu
Description
<EVENT> In this menu all active events are listed. Use
and to go
through the active events.
Events can be of the type WARNING or ERROR.
If a new event occurs or there is a change in the event list while
you are in the
EVENTS menu, a * is shown in the upper left
corner of the display, next to the menu name. Press OK to update
the EVENTS list, the * will be removed.
A
> means the event text is longer than the display. Press to > to
see the remaining text.
Table 5-20: EVENTS menu of the ACU
SATELLITE menu Description
Table 5-19: SATELLITE menu of the ACU (Continued)
▼ ▲
▲ ▼
Figure 5-29: Reset the system
▲ ▼
0DLQ1$9*+0'01(72./$1±
75$&.,1*
6$7:5;/+7;0$5