INSTALLATION INSTRUCTIONS
NI SCXI -1379
Terminal Block for the NI SCXI-1130
This guide describes how to install and connect signals to the
National Instruments SCXI-1379 terminal block to configure the
SCXI-1130 as an 8x32, 1-wire matrix.
The SCXI-1379 terminal block, which installs in front of the SCXI-1130
switch module, uses screw terminals to connect signals and the trigger
input and trigger output signals to the switch.
Refer to the
NI Switches Getting Started Guide
to determine when to install
the terminal block.
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a tip, which alerts you to advisory information.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
bold
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names and information on hardware labels.
™
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
