manualshive.com logo in svg

Furuno FCR-2107 series, Руководство оператора, Страница: 385 / 556

Поделиться
Скачать
Furuno FCR-2107 series Скачать руководство пользователя страница 385

15. Navigation Sensors 

 

 

15-17

True wind or Relative wind may be selected from the Other dialog box in the Sensors menu.  

 

Relative wind/true wind
selection box

 

POSN

kn

kn

 

15.8.1  Installation parameter for wind sensor 

There are installation parameters for a wind sensor: 

• 

Source of True wind (Setting for inputted serial data) 

• 

Display format (Relative wind, true wind) 

• 

Output format to TT (output format to TT) 

 
The tables which follow describe the above-mentioned parameters. Greyed options are default settings. 

Source of true wind 

Option Description 

Receive (R)elative/Apparent Wind and Calculate True 
Wind 

R(Relative) is extracted from the MWV sentence, read 
as Apparent data and North and Theoretical are 
calculated. 

Receive (T)heoretical Wind(HDG) and Calculate True 
Wind 

T(True) is extracted from the MWV sentence, read as 
Theoretical data and North and Apparent are calculated. 

Receiver (T)rue Wind(North) and use it directly 

T(True) is extracted from the MWV sentence, read as 
North data and Apparent and Theoretical are calculated. 

Display format 

Option in Sensor dialog box 

Option 

Rel wind 

True wind 

Display Rel(=Theoretical) or True(=North) 

Theoretical 

North 

Display Rel(=Apparent) or True(=North) 

Apparent 

North 

Display Rel(=Apparent) or True(=Theoretical) 

Apparent 

Theoretical 

 

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов