manualshive.com logo in svg

Furuno FCR-2107 series, Руководство оператора, Страница: 175 / 556

Поделиться
Скачать
Furuno FCR-2107 series Скачать руководство пользователя страница 175

7. Vector Chart Material 

 

7-3

Horizontal datum: 

Horizontal datum of the chart data as published by the chart producer. By definition this must 

be WGS 84. 

Vertical datum: 

Vertical datum of the chart. 

Sounding datum: 

Datum used for soundings. 

Quality of data: 

Quantitative estimate of the accuracy of chart features, given by the chart producer. 

Magnetic var.: 

Amount of magnetic variation. A positive value indicates a change in an easterly direction and a 

negative value indicates a change in a westerly direction. 

Depth: 

Unit of measurement for depth. 

Height: 

Unit of measurement for height above sea level (for example, clearance height). 

7.1.3 

Permanent messages for S57 charts 

Permanent messages help you keep the S57 charts up-to-date and these are shown at the top left corner on the 
screen. Permanent messages appear if the system detects a condition which may cause a chart to be not up-to-date. 

Note:

 The system can assist in keeping RENC-received charts up-to-date. For charts which have been loaded from 

sources other than an RENC, the system is unable to know the exact up-to-date situation. 

For further details see section 7.11 Chart Viewing 
Dates and Seasonal Features of the Vector Chart. 
 

You have loaded updates into your hard disk, but 
these updates are not included in the SENC. The 
name of the chart appears in orange in the chart 
catalogue. 

Perform SENC conversion for these charts. For 
SENC conversion, see section 7.3.6 Using SENC 
convert window to initiate SENC conversion. 

Permanent message

At least one of used charts is not up-to-date. At least
one update is loaded in hard disk, but not in SENC.
Use Chart Menu - Set Chart viewing dates to check charts.

For further details, see section 7.6.3 Knowing up-to-
date status of an RENC product list. 

You have loaded an update which contained cancel 
information for a chart, and you have chosen not to 
remove the cancelled chart. This permanent 
indication reminds you about your intended use of a 
cancelled chart.  

Consider removing the chart. For information on 
how to remove S57 charts, see section 7.4.5 
Removing an S57 chart cell from the system. 

 

Permanent message

At least one of used charts is canceled.
Use Chart Menu - Catalogue to check charts.
Use Chart Menu - Remove to remove canceled charts.

 

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов