manualshive.com logo in svg

Furuno FCR-2107 series, Руководство оператора, Страница: 344 / 556

Поделиться
Скачать
Furuno FCR-2107 series Скачать руководство пользователя страница 344

12. User Chart Control 

 

12-12 

12.6.4 Tidal 

page 

The Tidal page lets you inscribe 
tidal data on a user chart. To 
choose this page, push the right 
button (Next Card), click the tab 
with the left button.  
 

  

kn

 

 

Enable changes:

 

Check in order to modify user chart. 

Note:

 The user chart may only be modified in the Course-up or North-up mode.

Tidal box:

 

Shows the current and total number of tidal points. 

Name: 

 

Permits naming of current tide. 

Type:

 

User can choose type of tide here. 

Position: 

 

Manually enter latitude and longitude of tide in this box. 

Orientation, Strength and 
Time:

 

You can enter speed, course and time for tide. Note that time of the tide is 
always in local time. 

Add:

 

This function adds new record next to current record. 

Import:

 

User is able to choose from the list of user charts to import to current tidal file. 

Delete:

 

This function deletes current record of tide. 

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов